Gps Antenna

ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).

Specifications
Product code ACGPSA
Center frequency 1575.42 Mhz
Gain 26 dB
Water resistance 100% waterproof (IP67)
Connector SMA
Cable 5 m RG-174/U (standard)
Standard mounting Magnetic base
DC voltages 3 V +-0.3 V
DC current 8 mA max
Dimensions 46.5 x 46.5 x 12.5 mm
Weight 35 g (without cable), 120 g (with cable and connector)
Operating temperature -40°C .. +85°C tested

The antenna enables direct connection of a car navigation, both factory as well as OEM one. High antenna power gain and the use of amplifier make it as efficient as roof antennas as far as the quality of GPS signal is concerned. Thanks to magnetic base and small dimensions, it can be easily mounted on a control panel, whereas its installation means only plugging in plug into navigation antenna socket.

Antennas are available with different terminals, depending on the navigation antenna socket:

Features

GPS/GLONASS Antenna Dielectric Antenna Frequency Range 1575-1610MHz; Polarization RHCP;Gain 2dBic（Zenith);V.S.W.R ＜1.5;Impendance 50Ω;Axial Ratio 3dB（max）
LNA Gain 28±2dB;Noise Figure ＜1.5;Ex-band Attenuation 12dB @ CF+50MHz/16dB @ CF-50MHz; V.S.W.R ＜2.0; Supply Voltage 2.2~5V DC ;Current Consumption 5~15mA
LTE Antenna Frequency Range 700-960MHz/1710-2700MHz: V.S.W.R ＜2.0; Polarization Linear; Gain 2.0dBi; Impendance 50Ω
WIFI Antenna Frequency Range 2400~2483.5MHz; Band Width 83.5MHz, Polarization Linear; Gain 3dBi; V.S.W.R ＜2.0; Impendance 50Ω
Mechanical Cable RG174
SMA Male connector on LTE, WIFi,GSM; SMA-RPSMA adapter for wifi
Material ABS
Mounting Method Screw

Package content

Antenna
Nut, washer

Product description

This GPS antenna is a high gain and high efficiency antenna designed with lightning protection antistatic (LNA) function. It is widely used in power plants and supports 1559-1577 MHz frequencies.
Technical specifications

Frequency: 1559-1557 MHz

Gain: typical gain of 28 ± 2 dB

Voltage: 3 V ± 0.3 V DC

Current: ≤ 10mA @ 3V

Noise figure: 1.5 dB max

Bandwidth: 18 MHz min

VSWR output: 3.0 max

Polarization: right circular polarized antenna (RHCP)

Filter: SAW filter 30 dB min ± 45 MHz

Cable length 2 meters

N type male connector

Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile waterproof housing and provides 3 easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks).

External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.

In the Box

GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
Antenna cable (32 ft/10 m)
Installation instructions

General Specifications

Dimensions (DxH): 3 19/32" x 1 15/18" (91.6 mm x 49.5 mm)
Weight: 7.1 oz (201 g)
Temperature range: -22° F to 176° F (-30° C to 80° C)
Case material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

Type: Antennas
Box Dimensions: 7"H x 7"W x 7"L WT: 1.85 lbs

Regulatory Compliance: RoHS 2011/65/EU
Compliant | ISO 9001:2008
Document version: TS-GPS-1_v1.0
Product Specifications may change without prior notice
Revised: November 2016

Electrical Specifications
Frequency Range L1: 1565-1610 MHz
Frequency Range L2: 1217-1250 MHz
Gain (max): 21±2dBiV
SWR: < 1.5:1DC
Voltage: 2.7-3.3 VDC
Current: 5-15mANoise
Figure: ≤1.5 dBNominal
Impedance: 50 Ω
Polarisation: RHCP
Filter Out Band
Attenuation: 12dB Min f0+50MHz16dBi Min f0-50MHz
Cable: 0.5m 1.13
Coaxial cableConnector: SMA (m)
Voltage: 2.7-3.3 V
Max. Power-W: 50W
Environmental Specifications
Wind Survival: 160 km/h
Temperature Range (Operating): -40°C to +80°C
Environmental Conditions: Outdoor
Operating Relative Humidity: Up to 98%
Storage Humidity: 10% to 95% - non-condensing
Storage Temperature: -45°C to +85°C

Mechanical Specifications
Product Dimensions (L x W x D): 25 mm X 25 mm x 6.7 mm
Packaged Dimensions: TBDWeight: 0.164kg
Packaged Weight: 0.167kg
Radome Material: ABS (Halogen Free)
Radome Colour: Pantone - Black
RAL - Black

QuSpot omni LTE antenna for Teltonika RUTx09 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded GPS antenna. If you use RUTx09 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure.

Antenna PUCK-4 offers a small profile antenna for use in the IoT/M2M, Smart Meter, Smart Utilities and Transportation markets. This 3-in-1 antenna boasts 2×2 MIMO LTE and GPS/GLONASS within the same enclosure, while keeping implementation as simple as possible with its many mounting options. Due to excellence in engineering and a solid design, this antenna provides exceptional performance for its small size.

The 2x Cellular MIMO antennas (for 2G/3G/4G) cover the 698MHz to 2700MHz band, which includes the most popular international LTE bands. The third antenna is a high performance active GPS/GLONASS system operating at temperatures as low as -40ºC.

Poyntingʼs new PUCK antenna range provides easy installation with the multiple mounting options. This includes as standard:

Spigot Mount – two different lengths included (40mm & 80mm)
Vertical Pole mount (inner & outer mounting for smaller and larger poles)
Horizontal Pole Mount (e.g. marine rails)
Magnetic Mount
Surface Mount (Double Sided Tape)
Wall Mount

Antenna OverviewPorts1 & 23SISO / MIMO2x2 MIMON/AFrequency Bands690MHz -3800MHz1575.42MHz/1600MHzPeak Gain6 dBi21 dBiCoax Cable TypeRTK-031RTK-031Coax Cable Length2m2mConnector TypeSMA MaleSMA Mal

Marine Ship GPS Receiver Antenna Module NMEA 0183 Baud Rate 4800 DIY Connector
Description:
1. Built-in 28db gain two-stage LNA amplifier active antenna.
2. The baud rate is optional, 4800, 9600, 38400, 115200.
3. Output statement: RMC, VTG, GGA, GSA, GSV, GLL can choose to output.
4. Level can be selected: TTL or RS232.
5. Data output frequency is optional, 1HZ - 10HZ
6. Built-in FLASH can save the parameter settings
For outdoor positioning, water detection of marine navigation, GNSS, time synchronization etc..
We can provide a number of customized services, if you have a special specification needs to consult our customer service staff, we will provide you with satisfactory service!
NMEA:0183 (2.3-4X)
The default baud rate: 9600 (set 19200-115200-38400-57600)
Refresh frequency: default 1HZ (set 1-10HZ)
Built in: FLASH can save settings
Support: 12V wide voltage supply.




Operating voltage 12V
Cable length: 5M
Output protocol mode: RS232
Waterproof grade: IPX67

Features
•High Selectivity Dual Filter RF Architecture
•Eliminates high Power RFI Operating within Multi-Located Base Station Environment
•Impact Resistant ASA Radome
•Rugged Die-Cast Aluminum Base
•Integrated Bulkhead, TNC Jack.
•IP67 Rated•¾” NPT and 1”-14 Marine Mount Compatible
•UV Resistan/Cool Gray for Reduced Visibility
•Mounts to standard pipe up to 1-1/2”
•High grade stainless steel and Dacron plated steel mounting clamps
DescriptionThe HG-GPGLTIM32-MNT GPS/GLNSS timing antenna is a professional grade product used for advanced time and fre-quency system applications. Housed in an IP-67 rated high impact ASA ad die cast aluminum housing itʼs suitable for all outdoor and marine environments. It includes a set stainless steel and Dacron plated mounting clamps.
ConfigurationDesignGPS/GLNSS
Application BandL1Band TypeSingle
DC InjectionCoaxial feed cable center conductor
Connector TypeTNC
JackHousing
Material and PlatingGray