Fixed cellular terminal GSM

Original travel charger 2N FCT 12V/2A Stabil

Original power charger Ericsson FCT 250, 251, 121, 151

FCT GSM DUAL BAND ML-1103 device for alarm communication.

Compatible with all alarm centers and all mobile networks

      PSTN backup mode
      LED display with signal level indicator
      Power supply 5-13.8V DC
      Consumption 25mA on hold and 400mA on call
      It has an outdoor antenna with a 2m cable

Detailed Selling Lead Description
Features:
1) Simple to install and easy to maintain
2) Steady module and reliable design ensures good performance
3) Provides optimized circuit directly connecting the exchange device for extensions
4) Compatible to most telephones, PBX and VoIP gateways (for call termination)
5) Strong signals with high gain antenna
6) Attractive plastic casing
7) SIM card supported (3V, 5V)
8) Caller ID display
9) Provides reversal polarity signal for metering
10) No noise and clear voice
11) Suitable for wide voltage range and low power consumption
12) Suitable for all kinds of weather and environment
13) RJ-11 ports (two extensions:Line / phone and line (optional))
14) Locking PIN / network (optional)

Specifications:
1) Air interface standard:GSM 900 / 1800MHz phase 2+
2) Frequency ranges:
A) GSM 900:
I) Transmission:890 ~ 915MHz
Ii) Reception:935 ~ 960MHz
B) GSM 1800:
I) Transmission:1, 710 ~ 1, 785MHz
Certificate CE
Internal rechargeable battery. Standby time: 48 hours. Duration in conversation: 2-6 hours. Recharge time: 6 hours.

The HT812 is an advanced 2-port analog telephone (ATA) adapter with 2 FXS ports and an integrated Gigabit NAT router. Designed based on the leading AIP / SIP gateway technology in the Grandstream market with millions of units successfully installed worldwide, this powerful ATA offers exceptional voice quality in various application environments, encryption reinforced with a unique security certificate per unit, automatic provisioning for volume deployment and device handling and excellent network performance for home and office use.

Grandstream brand
Model HT812
Type - Gateway
Ports - 2 x FXS ports
- 2 x 10/100 / 1000Mbps RJ45 ports
Voice, fax, modem - Voice Codecs: G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A / B, G.726, iLBC, OPUS, Dynamic Jitter Buffer, advanced line echo cancellation
- Fax-Over-IP: Group 3 Relay Fax compatible with T.38 up to 14.4kpbs and automatic switching to G.711 for Fax Pass-through
- Ring Load: 3 REN, up to 1 km on the 24AWG line
- Caller ID: Bellcore Type 1 and 2, ETSI, BT, NTT and CID based on DTMF
- Disconnection Methods: Busy Tone, Reverse Polarity / Wink, Loop Current
- Network protocols: TCP / IP / UDP, RTP / RTCP, HTTP / HTTPS, ARP / RARP, ICMP, DNS, DHCP, NTP, TFTP, TELNET, STUN, SIP (RFC3261), SIP over TCP / TLS, SRTP, TR-069
- QoS: Layer 2 (802.1Q VLAN, SIP / RTP 802.1p) and Layer 3 (ToS, Diffserv, MPLS)
Signal - DTMF Method: In-audio, RFC2833 and / or SIP INFO
- Provisioning and Control: HTTP, HTTPS, TELNET, TFTP, TR-069, secure and automatic provisioning using AES encryption, syslog
- Media: SRTP
- Control: TLS / SIPS / HTTPS
Other features - LED indicators: POWER, INTERNET, PHONE1, PHONE2
- Factory Reset Button: Yes
- Telephony Functions: Display or blocking caller ID, call waiting, flash, unsupervised or supervised transfer, call forwarding, hold, do not disturb, 3-way conference
- Management: Support syslog, telnet, remote management using internet browser
- Power Supply: Input: 100-240VAC, 50-60Hz | Output: 12VDC / 0.5A
- Environment: In operation: 32º - 104ºF or 0º - 40ºC
- In storage: 14º - 140ºF or -10º - 60ºC
- Humidity: 10 - 90%, without condensation
- Dimension and Weight: 28.5 x 130 x 90 mm, 114 g (H x W x D) Weight: 353.33g
- Compliance: FCC / CE / RCM
Revision date 03-28-2017 by MSB

Technical characteristics

Type of product

Fixed cellular terminal
Width

122 mm
Depth

42 mm
Height

138 mm
Case color

Black
Technology

GSM / DECT

Gang

GSM 900/1800 (Double bands)
Service provider

Unspecified
Bluetooth Profiles

Generic Access Profile (GAP)
Phone functions

teleconference
Connector type

RJ-11
Accessories included

Power adapte

IMPORTANT NOTE :

1. A3802 support Dual SIMs,Dual Standby.

2. 2 lines can work simultaneously with 2 phones connected to the terminal

3. The defaulted antenna is 2 pcs outdoor antenna, if you need the indoor short antenna, please leave me message.

DESCRIPTION :

2 ports 2 sims GSM FWT / gsm fixed wireless terminal is a GSM to Analog Converter.It has dual chip dual sims card that support 2 phone calls at the same time. It produces 2 FXS lines to allow traditional regular phone to be connected and used just like a local landline (PSTN) except your calls will go out the GSM network.
This device can both receive and make calls. Users can dial the local calls, domestic and international calls with this Terminal connecting with a common wired desktop phone and a standard SIM card..

It is not a VOIP gate way, nor a GSM+VOIP gate way; It is a GSM Fixed Wireless Terminal that produces a Analog FXS phone line.

Application areas:

Remote country, Mountains, Dwelling house with weak signals, Public telephone shops
Offices, Removable places such as Ships, Trains, and Long distance buses.

The main applications:

Connect the RJ-11 FXS line to connect Ordinary telephone set for voice call.
Connect PBX for call extension.
Connect billing systems for public phone use.
Connect VoIP gate way to realize VoIP call termination.
Connect alarm system for security purpose. etc.

Features Supported:

1) It is a 2 channel GSM Gate way which has 2 RJ-11 outputs;
2) It can connect with ordinary telephone set, PBX , VOIP Gate way, Billing meter etc. ;
3) Dialing tone frequency:450hz;
4) Employ Industrial module to make;
5) SIM card supported (1.8V, 3V);
6) Caller ID display. Time,date,Signal display
7) DTMF Dialing;
8) Bell signal;
9) Polarity reversal;
10) The RJ-11 socket which connect the phone or billing system for metering purpose;
11) Antenna socket (SMA);
12) Working status and Signal Strength by LED indicator;
13) IMEI Change (Presetable).
14) Supports modem mode.
15) Automatically connects to IP network when dialing long distance ( Presetable )
16) Dial number Block ( Presetable )
17) Incoming number Block ( Presetable )
18) Volume adjustment. Time and date setting.
19) Auto card-locking and net-locking. ( Presetable )

Digital fixed cellurar ternimal Tri-band, GSM 900/1800/1900MHz, you can connect any PSTN internal or PBX system to works like simple line.
Requires an external common phone linked to the machine
Supports VoIP, PBAX, GSM and PSTN

The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone
set for voice call, to connect PBX for call extentions, to connect billing systems for public
phone use, to connect VoIP gateway to realize VoIP call termination, to connect alarm
system for security purpose, etc. It is not a VOIP gateway, nor a GSM+VOIP gateway, It is
a GSM Fixed Wireless Terminal that produces a Analog FXS phone line.
Air interface standard: GSM850/1900Mhz,900/1,800Mhz phase 2+ full band
Frequency ranges:
A) GSM 850 GSM 1900:
I) Transmission: 869.2 ~ 893.8MHz I) Transmission: 1, 930 ~ 1, 990MHz
Ii) Reception: 824.2 ~ 848.2MHz Ii) Reception: 1, 850 ~ 1, 910MHz
B) GSM 900: GSM 1800:
I) Transmission: 890 ~ 915MHz I) Transmission: 1, 710 ~ 1, 785MHz
GSM BOSSGSM15 User's Manual Version 1.1
4
Ii) Reception: 935 ~ 960MHz Ii) Reception: 1, 805 ~ 1, 880MHz
Phone interface: supply RJ-11 Phone Interface
Hanging voltage: 45V
Picking off voltage: 30mA / 41mA
Dialing tone Frequency: 450Hz
Antenna interface: Antenna amplifying>2.5db
Sensitivity:<-104DBM
Transmitting power<3W
Color: White /Black (optional)
AC-Adapter interface: Input: AC 110~240VAC 50~60Hz
Output: 12DC 1A.
AC-Adapter type: EU,US,AU,British can be optional
Available:
GSM 900/1800Mhz dual band, employing Wavecom Q2303A, Q2403A,Q2406A, P3203A,
Sim300W ,SIM500W module to make;
GSM 900/1800/1900Mhz Tri-band, employing Sim300z module to make;\nGSM850/900/1800/1900Mhz Quadband, employing M10,SIM340Z module to make.
Material ABS (Acrylonitrile Butadiene Styrene)
Dimension 170mm×118mm×30mm Excluding antenna
Weight 400g Weight of Main unit
Power Switch Rocker switch
Power Socket 12V DC input
Phone interface RJ11 2 RJ-11 ports
Antenna interface SMA-female
LED display
No.1: Power, No.2.in use, No.3, in talk, No.4,
Battery, if have, No. 5-7, Signal strength
From left to right(front
side view)
Front side
LEDs display for Signal strength, Power, Working
Status,Talking and Battery indicator;
Rear side
1pcs SMA antenna connectors, 2 RJ-11
output,Power port and switch;
Bottom side
1pcs Sim card holder slots, you can insert Sim
card into the slot .

Internal inside board Module FCT 3G GSM 2N EasyRoute.
IC: 2417C-MC8795
FCC ID: N7NMC8795
QUALCOMM
CE 0168

Small size

   Simple wall mounting.

   GSM-GPRS cellular network, 900/1800 MHz, free use for any operator.

   2 connection ports. Connectivity to PABX switchboard.

   Incoming and outgoing caller ID, DTMF / FSK compatible.

   Polarity inversion protection.

CONTAINS:

• Fixed-mobile telephone link

• Feeder-charger

• 4m cable antenna

• Telephone cable
Main Features:
 
- Small size
- GSM and GPRS cellular network, 900/1800 MHz
- PABX connectivity
- DTMF / FSK caller ID
- Polarity inversion protection
- Micro USB data port
- Rechargeable lithium battery
- Easy battery removal. External access in the box
- 3 hours of conversation when outside the power supply network
- SMA antenna connector for external antenna
- Approved
- Dimensions: 124 x 124 x 38 mm.
- Weight: 255 gr.

The Witura's WT-1010C2 GSM is a back-up alarm system that can be connected to any alarm. If the fixed telephone is cut by an attacker or a malfunction, the GSM and communication dialer will determine the line cut and send an alarm signal to the police, homeowner or signal reception center.
This GSM communication is used in Banking, ATMs, jewelery shops, homes, shops and where double protection is required on your property.
It has automatic control and reboot function. It can continuously monitor the system status and when there is a problem with the SIM card or the backup of the alarm and it does not work properly, the system will automatically restart.
The design of the WT-1010 features 3 relay outputs to achieve remote control. For example, you can use it to turn on / off lighting, air conditioning, remote refrigerator with SMS.
Automatic dialing to 8 phone numbers. The GSM dialer will also send SMS to 8 programmable mobile numbers to alert the user that the PSTN line has been cut off or not available.
Low power consumption. The GSM module uses 30mA in idle state and 260mA when transmitting an alarm
Available for 850/900/1800 / 1900MHz Frequency Band GSM ALARM for: Boat
Caravan
Container
Photovoltaic parks etc.
It is the ideal solution for your office communications needs. It provides your company with an economical and flexible solution allowing the use of an existing GSM network. And it is particularly useful in areas where there is no traditional telephony reception (OTE). This advanced, high-performance and high-end terminal supports the latest communication standards, as well as connectivity with call centers for lower communication costs, since it converts calls from fixed to mobile to mobile to mobile calls. : Compatibility with all Central Security Systems and Transmission at Signal Receiver.gsm works when the telephone line is cut
Ability to operate on all Mobile Networks operating in Greece.
PSTN Backup Mode.
In case of interruption of the OTE telephone line, calls are automatically made via Mobile Telephony.
It checks the correct operation of the SIM card and the signal levels of the mobile telephony.
Sending of text messages in case of interruption of OTE, PPC.
Ability to arrest and disarm the system as well as trigger costs
with SMS or application on android kai iphone.
Three digital inputs: Send messages when you activate the inputs or call the registered numbers or send a signal to the Signal Receiver.
Three digital outputs: It has three outputs, a 300mA open collector type and a relay power supply.
This way we can turn on and off various remote devices.
Can be connected to extra relay board 30A (VS-06).
It can accept up to 100 users.
It has a rechargeable battery to operate even with power failure.
It also has a screen for system settings and information, and has an LED for power and signal control.
It has an antenna with 3 meters cable.
Very low power consumption requires 30mA on hold and 260mA in call status.
Ease of placement on wall and / or table. It is a system of integrated and modern communication between the alarm and the Signal Receiver Center (ARC). So far, the communication between the alarm and the CLS is via terrestrial telephone line using the 4 + 2 (previously) protocol, Contact ID and SIA . With this method the ACS is only updated in the following cases: When arming-disarming the system. From a possible violation that may arise. From a 24-hour test set by the technician. The resulting problem is that when the connection of the telephone line is interrupted, the ACS is also stopped. A solution to this problem is the use of GSM gateways.

The Ericsson G30e terminal features the latest technology, which makes it perfect for everyday voice communication:

Dual band GSM (E-GSM 900, GSM 1800)
Analogue RJ11 interface for connection to a landline phone or analogue trunk.
Optional battery back-up
Superior call quality, indistinguishable to a call made from a landline phone.
SMA Female Connector for External Antenna

The FCT 600 is a GSM 4G VoLTE Fixed Wireless Terminal allows you to make local, national and international calls by connecting it to a conventional desk phone, installing a standard SIM card from any operator. It has an internal rechargeable battery, so in case of external power failure it will continue to operate.

The Jefton FCT-600 can be used in the following applications:

Those places where there are no wired telephone lines
Elevators and elevators
For temporary telephone communications
Precincts where there is poor indoor mobile phone coverage
Public booths
Companies and offices
Telephone switchboards with analog line input
Boats of all types
Trains
Buses

The FCT-600 offers stable performance. It is easy to install and operate, has a high signal reception capacity and allows stable and reliable communications to be established*
FEATURES

Compact size
Frequency bands: (LTE FDD) B1,B3,B5,B7,B8,B20,B28, (LTE TDD): B38,B40,B41, (WCDA): B1,B5,B8 and (GSM): B3 AND B8
Reception sensitivity: -104 db
Transmission power: 0.25W /0.5W
Antenna gain: 3.0 dB (omini-directional)/ 12 dB (directional)
Operating temperature: -35ºC to +75ºC
Telephone connector: 2x RJ11
External antenna connector: SMA
USB Type-C data port
Power: Lithium-Ion Battery 3.7V / 800 mAh
Operation autonomy: 48 hours in review / 2-6 hours in conversation
Battery charging time: 6 hours
AC/DC power supply: Input_ 100-240 Vac/ 50-60 Hz / 0.5A, Output: 12 VDC /1 A.
Consumption: ≤25 mA (sleep) / ≤300 mA (operating)
Dimensions: 160 x 100 x 30 mm
Weight: 320 gr

CONTENT

FCT-600 Mobile Link
AC/DC power supply
External antenna with 1 m cable
RJ11 telephone extension cable

*It will depend on the operatorʼs network

CellFax plus is a fully featured terminal that allows major network operators to provide a viable alternative to Fixed Line Connections by offering their customers Fixed Wireless Access to Voice, Fax, SMS and Data.

CellFax plus provides users with high quality voice using EFR (Enhanced Full Rate) codecs, the ability to reliably Send and Receive Faxes using a standard Analogue G3 Fax Machine and supports data connections using GPRS for Email and Internet access.

CellFax plus includes an integrated battery backup which enables continued use when mains power has failed or is not available.

The CellFax plus terminal can be self-installed by the end user, making the provisioning cycle simple and reducing costs for the network operator.

Key Features

Make and Receive Voice Calls via POTS Phone, PBX Trunk Port or PBX Extension Port
Fax Sending and Receiving via Analogue G3 Fax machine
GPRS Data via PC Serial port (Network dependent)
Battery Backup
LCD Display
Call Waiting
Three Party Conference Calling
Phonebook
Caller Line ID Presentation
Dialled Number substitution / modification
SIM lock
Network lock
Hotline automatic number dialling

Versions Available
Product 2G
(GSM) 3G
(UMTS) Battery
Backup Data Data Speed Interfaces Download
Datasheet
CellFax plus GPRS
(up to 85.6kbps)
2 x FXS
1 x FXO
1 x RS232 Serial

P108562 AS5401/2V Light GSM ISDN interface whith 2 GSM modules 0db fixed antenna power supply ,synchronisation ,
Targeted at outgoing calls.
Wirelees modules by Siemens embedded

Ericsson F250m / F250 FCT Fixed Cellular Terminal

Ericsson F250m Wireless Landline with Dial tone for PABX applications

The F250m Wireless Landline for PABX applications is a cost-saving solution for small and medium-size enterprises. Connected to a PABX telephone system, the F250m Wireless Landline can route outgoing calls to mobile phones through the GSM network. As a result your enterprise can benefit from the Least Cost Routing (LCR) capabilities offered by most PABX vendors for an optimal rationalization of your telephone expenses.

ERICSSON F251m (completed production) (REFURBISHED)
Ericsson F251m SOHO outwardly resembles its predecessor F151s but its functionality has been extended with a built-use data and fax. This enables data transmission standards GPRS and HSCSD as well as data transmission via the built-in analog modem V90. F251m also allows you to send SMS.
The device accommodates a battery that provides work F251m case of power failure. The device is attached to the city's port analog telephone subscriber by allowing direct connection to the GSM network apart from the cost of fixed-line operator.
For the device, you can also attach up to three analog telephony devices as analog phone, fax machine or fax modem. Using ISDN adapter, you can connect two devices F251m to port ISDN 2B + D PBX.
There are different adaptations F251m eg. Remote wireless monitoring of premises (using cameras), remote transmission of alarm or provide the full range of telecommunications in areas that do not have fixed-line telecommunications infrastructure - voice, fax, data transmission, Internet.
An important feature of F251m is signaling the start and end calls by reversing the polarity. This property allows precise connection time and so accurate pricing in the PBX.

Main Features

1. Convert phone call from fixed line to 4G LTE Network via VoLTE and optional 3G Network

2. 1x RJ-11 phone ports for connecting phone, PABX

3. 1x RJ-11 phone jack for connecting PSTN Fixed Line.

4. External Antenna connector – SMA Type

5. back-up LI battery (INTERNAL)

6. Volume adjustment and echo cancel

7. Support caller ID: DTMF Mode; optional FSK Caller ID

8. Reverse Polarity or 12/16KHz metering signal

9. USB port to connect PC for 4G Data network

10. Support SIM Lock and Network Lock

2N SmartGate is a single-channel analogue GSM gateway, which provides a number of services for cost efficient way of communication. It is intended for small size companies and households and its main objective is to save the users a lot on GSM call costs. 2N SmartGate can be connected to a PBX, to a standard telephone set or to PC (LAN) and can be used for Voice, Data through GPRS, SMS and PC Fax transmission.

2N EasyGate Analogue FCT with FAX capability
EasyGate is a single-line analogue fixed cellular terminal (FCT) suitable for SMEs to reduce call costs to mobiles, send and receive SMS and GPRS Internet connection. Simultaneous calls - up to 8 SIM cards - up to 8 Scaleable from 2 to 8 GSM channels Voice & data transmission Dial-Thru or dedicated connectivity SMS message feature Baby call feature CLIP support EFR super sound voice quality Serial port for GPRS / CSD connection Mobility extension feature FXS & FXO interfaces Connects to a 2-wire analogue trunk port interface on any PABX / analogue phone line Simple, user-friendly GUI for programming and monitoring calls



2N EasyGate is a NEW type of analog GSM Gateway (Fixed Cellular Terminal) from 2N's portfolio. Because of its features it is suitable for small companies, which use it for saving costs of calls to GSM, SMS sending and GPRS Internet connection.

For medium size companies we recommend Omikron Multichannel Analog GSM gateway.



The analog 2N EasyGate gateway has been designed not only for Voice transmission between your PBX and GSM networks, but also for Data, SMS and PC Fax transmission between your PC (LAN) and GSM networks.


Using this gateway you can half your company telephone bill since all calls directed to GSM networks are routed through EasyGate and extortionate bills for the PSTN-GSM connection are avoided.


The EasyGate Gateway is not only a tool for call cost reduction as it can provide other communication solutions such as sending and receiving SMS and PC fax messages, thanks to the GPRS you can browse internet and send e-mails, thanks to the FSK feature you can see the calling party on the phone (if supported by the telephone) - all these features are supported by the 2N EasyGate GSM Gateway.


Serial port for GPRS connection enables e-mail communication, Internet browsing and PC faxes sending and receiving. These means of communication are widely used on boats and in distant areas.


Installation, supervision and maintenance are other eminences of the EasyGate GSM gateway.

In case you use prepaid SIM cards, you obtain automatically SMS message about low credit on the SIM card. Other smart feature which is highly appreciated is a periodical gateway status SMS message, which informs you about the current signal, number of calls, etc.


NEW complementary 2N product - EnergyBank - is a back-up power supply that can be used with any equipment requiring 12V supply. With this product, any 12V equipment can work for a substantially longer period of time without stable feed.

The 2N® EasyRoute is a wireless UMTS router that represents a highly reliable alternative to ADSL at available price. It is the ideal solution for smaller companies or companies with branches that, for whatever the reason, are looking to free themselves from fixed line dependence.

The broadband wireless Internet with a built-in Wi-Fi access point and fixed line function can be used simultaneously without restriction or complicated installation. Sending SMS messages directly from the web interface is a welcome bonus.

The 2N® EasyRoute not only reduces your financial costs, but makes your everyday work much easier. This is the right time to say goodbye to a fixed line and get hold of the latest communication equipment.
Product Info: SierraW-SL8082 (900/2100 Mhz), FXS port, FXO port, 100-240V/0,5A EU plug, WITHOUT BATTERY HOLDER

New 2N® EasyGate PRO is a single-channel analogue GSM / UMTS gateway suited not only for calls, but also for data, fax or SMS text messages. It is a solution based on mobile network used for a fixed line replacement. Compared with 2N® EasyGate, it can also be equipped with battery backup. This makes it especially suitable for environments requiring resistance against power outages.

Land-line replacement
Easy installation
FAX services over the GSM network (GSM Fax version)

The new 2N® EasyGate UMTS USB is an analogue UMTS/GSM gateway for the high speed transmission of voice and data. In addition, it also allows the receiving and sending of SMS texts using a simple SMS client. Being a full-blown alternative to a fixed line, it can meet the needs of customers who want to call while remaining connected to the data network.

Fixed-line replacement
Data transfers
Call-metering impulses at 16 or 12 kHz

Technical Parameters
UMTS/GSM
UMTS/WCDMA networks: 850, 1900, 2100 MHz
GSM networks: 850, 900, 1800, 1900 MHz
SIM card: 3 V/1.8 V plug-in
Data
UMTS/HSDPA/HSUPA: downlink max. 7.2 Mbps
GPRS/EDGE: class B, total max. 5 slots, multi-slot class 12
CSD: max. 14.4 kb/s
USB Interface
Interface: USB 2.0 full speed
Connector: USB type B
Power source
Adapter: 100-240 V/12 V DC; 2 A
DC adapter: 10 to 16 V DC
12 V power consumption: on standby – 100 mA, during a phone call – 650 mA, data connection – 950 mA
Connector: DC Jack 2.1 mm
Line interface
Interface type: two-wire analogue, FXS
Connector type: RJ 12, 6/2
Supported modes: DTMF/ pulse
Caller number display: CLI transmission to ETSI FSK standard
Antenna Impedance: 50 Ω
Connector type: SMA (Female)

The G36 Fixed Wireless Terminal is a flexible and cost-effective solution for connecting your PABX telephone system to the digital wireless GSM .

The 2N® SpeedRoute is a wireless LTE router, which provides you with extremely fast Internet connection. And the important thing is you can even enjoy this luxury in communication without a fixed line. If you already have a fixed line and donʼt want to give it up, you can use the router as a back-up connection in the event of technical problems on the line. But there are many more situations where the 2N® SpeedRoute can be of invaluable assistance.

Digital GSM Gateways (BRI) are used for saving costs related to calls to GSM from landlines by the smart directing of calls to two different operators (2 SIM cards inside the gateway). BRI gateways are very common among users who use an ISDN BRI connection as it is possible to connect to any digital PBX!
With the option of connecting to a free port of a digital PBX The user chooses from 2 versions - 1SIM/2SMI (calling one/two operators).

The 2N® VoiceBlue Next VoIP gateway will bring you a significant reduction in the cost of calls to mobile networks, while being compatible with a wide range of IP PBXs. Thanks to its web-based interface you will configure it easily in a few moments. You will also appreciate its innovative features, such as a powerful savings algorithm, the CallBack service or the 2N® Mobility Extension.

Technical Parameters
VoIP
SIP Signalling
DTMF inband, RFC2833
# of voice channels: 2, 4
Codecs: G.711 PCM A-law/u-law, G.729 Annex AB
GSM/UMTS
# of channels: 2, 4
Frequencies: GSM 850/900/1800/1900MHz, UMTS 800/850/900/2100MHz

USIM/SIM card: Small 3V, Remote SIM support
Communications
Protocols: TCP, UDP, IP, RTP, TELNET, HTTP, SNMP, POP3/SMTP, SMPP
Connector types: LAN 100Base-T, RJ45
Administration method: Web interface, AT commands
Power source
External power adapter: 90-230V, 50-60Hz to 12V DC 2A
Power over Ethernet (PoE)
Power consumption: Max. 20W
Other
Operating temperature: 0°C – 40°C
Operating humidity: 10-95% (non-condensing)
Dimensions: 220 x 45 x 140mm

1. Convert phone call from fixed line to4GLTE Network via VoLTE and optional3GNetwork
2. 1x RJ-11 phone ports for connecting phone, PABX
3. 1x RJ-11 phone jack for connecting PSTN Fixed Line.
4. External Antenna connector – SMA Type
5. back-up LI battery (INTERNAL)
6. Volume adjustment and echo cancel
7. Support caller ID: DTMF Mode; optional FSK Caller ID
8. Reverse Polarity or 12/16KHz metering signal
9. USB port to connect PC for4GData network
10. Support SIM Lock and Network Lock

Technical specifications
4G/3G parameters
Support4GLTE 1800+2600MHz, etc.;3GHSDPA/UMTS 2100/900MHz
4GLTE Cat.4 Downlink : 150Mbps
Power supply
AC input voltage 100V~240V AC
Power adaptor output DC 12V~9V/1.5A~1A
Battery 1000mah Li-thium battery
Maximum charging current 600MA
DC input voltage range 9V~12V DC
Maximum working current 700ma(DC7.5V, Average current, excluding charger current)
Application environment
Operating temperature: 0~+75゜C
Relative humidity: 10%~90%
Device dimension : 12x12x3.5cm

Convenient GSM gateway SAGEM RL302, Wireless Voice Box

SAGEM RL302 is a convenient GSM gateway used to connect phone to access GSM network plugging your phone on the device will allow you to:

-send and receive voice calls,

-send and receive SMS*

-Interrogate your voice mail

Sagem XS200/MO300 Industry GSM module
Digital Antenna inside
Support voice and SMS
Support CLIP
Visualization and voice

DTMF dial
Support AMR, EFR, FR and HR codec
Call waiting
Multi partite talking

GSM Frequency
-TDMA 850/ PCS 1900
-EGSM 900/ DCS 1800
Support 3V SIM card

Power Supply
DC 6V/1A
AC 100- 240 V. 50-60 Hz

Dimensions: L139 *W95* H30mm
Weight: 200g

The box contains:

-rl302 device,

-external power supply,

Quick installation guide,

Your phone and all networks must support the SMS feature

SAGEM RL300 Fixed GSM Gateway with Voice and SMS service - Ref

The RL300 of Sagem is a mobile device (FCT) which is connected to telephone or Pbx (as a GSM gateway) or by phone in the elevator and make all calls via GSM. To function, it is necessary a SIM card.

It gives us communication solutions for points that are not land lines.
Compatible with all mobile networks COSMOTE, WIND & VODAFONE (GSM 900 / 1800MHz) with Caller ID.
If we have frequent communication with mobile phones and want to avoid the radiation.
Ideal for routing calls to mobile in pbx.
It can be connected to a pbx to route calls to mobile (GSM gateway) to reduce the cost of calls to mobile phones, especially when we have company mobile phones.
It can also be connected to simple phone to operate as a stable mobile device in areas with weak signal.
If the use of simple apparatus is necessary (use by young children and elderly at home), then this device gives the solution.

Aplication:

GSM 500 Data is the evolution of the GSM500 universal gateway delivering voice and transparent data transmission via GPRS with only one SIM

System reliability: High transmission speed
Wide power supply range from 10 to 17 Vdc
Industrial dual-band module Technical data:


Comes with antenna extension L = 2 m
PSTN-line cost reduction
Low consumption
4 Leds signalling: device operation status, GSM signal strength, line status and/or data transmission and power supply status
Automatic reboot under prolonged GSM signal absence
Roaming management feature
Data transmission through DB-9 connector
Easy installation by connectors and/or termianl blocks
Remote management of expiring credit and battery alarms via SMS
Remote control of credit status, battery status and GSM signal level via SMS
Remote reboot
Remote programming via SMS.

Technical:
GSM field strength signaling LED
Device status signaling LED
Line status / data transmission status LED (GSM500.net)
Power status indicator LED
Quad Band GSM module (all GSM500 versions)
Transmission power 2 W
Input for 12 Vdc power supply
Input for external 230 Vac adapter
DB-9 female connector (GSM500.net)
Relay output (R2R version)
External antenna (cable L = 2 m)
External adapter (input 230 Vac 50 Hz; output 12 Vdc 500 mA; CE mark; versions GC, R2R, .net).

Supplied with 2m magnetic base antenna, telephone type connection cable (2m), internal backup batteries, external power supply and DB-9 connector for data transmission in RS-232 standard. Allows voice and data transmission with a single SIM, remote control of local serial communications and telemonitoring via the COMNet system