The product is paste-like, the colour silver-grey.
Recommended soldering temperature: 217°C
Content: 50g, is enough for approx. 30.000 soldering points
Storage stability: approx. 5-6 months, recommended for storage in the refrigerator. (0-10°C).
For lab samples, small series, model-making, for a comfortable and professional processing of SMD-comonents with the help of hot air irons, hot plate, solder iron. Stored in a practical plastic case/syringe, garantees therefore a clean and pricise processing. The Solder Paste can be used directly from the cartridge, no mixing is required. Especially helpful by very dense placement.
Easy processing with regulated hot air soldering iron or electronic soldering iron - apply the dosed paste on the solder point, place the component, heat the solder point, and the SMD-solder surface is ready as well as the SMD-circuit. The solder paste can also be used for SMD-Rework applications as new contact layer, so that you can achieve high-quality soldering surfaces. The soldering paste (or: paste solder) is a supply material like wire solder, colophony and belongs to every solder surface.
Metal components
Sn 96,5 / Ag 3,0 / Cu 0,5
Solder constituent parts/particle size
25-36µm
Melting point
217°C
Proportion of flux
10,5 - 12,5 %
Copper
none
Halogen content
none
Insulation resistance 1 x 1012 Ohm
Utilisation time
24 hours
Flow rate 90
