The D100, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts.
This charger features:
► Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC)
► Terminal voltage control
► Re-Peak mode for NiMH/NiCD batteries
► Battery meter
► Battery internal resistance meter
► PC communications
This chargers comes with two XH balance boards, XT60 with crocodile clips, two XT60 charge leads, two deans charge leads, and an AC power cord with crocodile clips for DC.
The D100 has been created with automated safety precautions, including a charging current limit, capacity limit, temperature threshold and processing time limit.
This charger is also compatible with both iOS and Android smart phones via a Wi-Fi Module (sold separately), making operation easier than ever.
Specifications:
Input voltage: AC 100-240V / DC 11-18V
Charging circuit: AC Input 100W / DC Input 2x100W
Discharge circuit: 2x10W
Charging current: 0.1-10A
discharge current: 0.1-5A
Balancing Leakage Current Port: Max 200mAh / cell
Slow Charging current: 20mA-300mA & OFF
LiPo / LiFe / LiIon / LiHV batteries: 1-6 pcs.
NiMH / NiCd batteries: 1-15 pcs.
Voltage Battery Lead (PB): 2-20V
Dimensions: 163x153x72mm
Weight: 975g
