Close search
  • View Cart

    Your shopping cart is empty!

+

Dear customers,

Welcome to our new e-shop! All users who have already registered in the previous e-shop, please use the email you provided as your username to log in.

The password remains the same from your first registration. 

Thank you very much.

Best regards,
Pds.com.gr

Network Switch

1 - 5 / 5 (1 Pages)
External USB Fax Modem 2 port 56k Dial Up V.92/V.90 KF-UM52 (OEM) DUAL PORT Box
Last Item
Overview:

The small sized 56K USB Fax Modem is to connect phone to PC via USB port tomake/receive voice calls, and send/receive fax. It's with Conexant Chipset

Item Description
Features:

● Brand new! Conexant chipset!

● Ports: RJ11 (common telephone/dial-up modem interface) USB (type-A Male)

●Data mode capabilities: V.92, V.90 56 Kbps

●Fax Mode capabilities: ITU TV. 17, V. 29, v.27ter, and V.21 Ch2 Group3 FAX

●Error Correction capabilities: V.42, MNP4-2

●Data Compression: V.44, V.42bis, MNP 5

●Operating Temperature: 0°C- 40°C

●No external power supply required

●System Support: Windows 98 / 2000 / XP / XP64 /Vista 32 & 64 /Windows7 32& 64/Linux Note: Mac is not supported.



Applications:

●Make Voice Calls from your PC

●Send/Receive Fax with your PC

●Connect to the internet at 56k dial-up modem speeds

　

FAQ:
1. I canʼt receive fax?

BitWare, WinFax, and the Fax software thatʼs from Windows are supported by the modem. Eastfax may be unable to be supported by the Conexant modem esp. for receiving fax.

Besides, all modems donʼt support receiving or sending faxes while PC is turned off.

2. My windows7 canʼt find the modem?

The modem supports windows7 32bit and 64bit perfectly. Most windows7 OS can recognize the modem and install its driver automatically. However some compressing edition of windows7 canʼt do it. Then you need to install the driver from its CD drive.

3. How do I check whether the modem driver is correctly installed and working properly?

1). Go to Modem inside the Control Panel and check if there is any modem listed. Then click on the Diagnostics tab, highlight the com port where the modem is set and click on More Info. You should see a set of commands and responses listed. 2). Try to connect to an ISP.

4. My modem doesn't connect or stay connected at 56K?

Sometimes the phone line conditions are unable to support V90 connections and consequently are unable to operate at 56k. Your modem will perform better if you make a V34 connection instead. To accomplish this, the modem must be given the at+ms=v34 command. This can be done in a HyperTerminal session or added to the modem initialization (init) string. Please see the help files for your respective operating system for more information.

4. When I try to access my modem I get a blue screen?

First try to re-install the drivers. If the modem still doesn't work try updating the drivers. If the problem only recently started happening try removing any new hardware or software that was recently installed.

5. I am having problems connecting or my modem keeps on disconnecting.

This can sometimes be caused by other equipment that is connected to the same telephone line, by using a surge protection device on the telephone line or by faulty telephone wiring/cords. Try the following to see if it resolves your problem.

●Disconnect all other equipment from the telephone line, especially cordless phones and answering machines.

● Try connecting the modem to a different telephone outlet to see if the wiring is at fault. (Temporarily move the computer - do not use a long extension cord).

●Connect the modem to the telephone outlet directly using the telephone cord supplied with the modem/computer, do not connect via any surge protection device extension cords or adaptors.

5. I can't receive fax sometimes?

One reason may be that there is something wrong with the RJ11port of the modem. The metal spring may be oxidized. Can you use an eraser to clean the spring and try the modem once more?

Feature

l Dial up voice fax data modem

l Chipset set: Conexant 93010

l External modem

l USB 2.0 interface

l 56 Kbps download speeds

l V.92 lite protocol

l Up to 48 Kbps uploads

l 14.4 Kbps fax mode

l AT command set feature

l Quick connect and modem on hold features

l Supports auto dial, pulse dialing, auto answer, auto retrain

l Link LED

l Compact size



Modem

l V.90 (up to 56Kbps download, 48Kbps upload)

l V.90 (up to 56Kbps download, 38Kbps upload)

l V.34 (4.8 Kbps to 33.6Kbs)

l V.32bis (4.8Kbps to 14.4 Kbps)

l V.23 (75bps to 1.2 Kbps)

l V.22bis (50bps to 2.4 Kbps)

l V.21, Bell 103/ Bell212



Automode

l V.44/V.42bis/MNP 5 data compression

l V.42/MNP 2-4 error correction

l V.59 Diagnostic

l Hayes AT Command set

l TIES escape code

l Quick Connect(V.92)



Fax

l Group3, Class 1

l V.17

l V.29

l V.27ter



Voice Features

l ADPCM voice compression

l Digital Answering Machine



Telephony Services

l Wake Up on Ring

l Ring detection

l On/Off hook control

l Call progress monitor

l DTMF detection and generation

l Voice/fax/modem distinction

l Caller Id(optional)

l Modem on Hold (V/92)



Video Conferencing

l V.80/H.324 interface support



Operating System Support

l Windows 98, 98SE, ME, 2000, XP, Vista 32/64Bit, Windows 7 and Linux

l Power Consumption

l 50mA Operating Mode

l 0.5mA Stand-by

l Diagnostic Tool

l Modem Helper
MODEM-FAX KF-UM52 USB EXTERNAL DIAL UP V.92/V90
[cod0029775]
74.40€
60.00€ + TAX 24%
Externall USB Fax Modem 56Kbps Lenovo Conexant RD02-D400 43R1786 43R1815 with caller ID 1 PORT
New
Overview:

The small sized 56K USB Fax Modem is to connect phone to PC via USB port tomake/receive voice calls, and send/receive fax. It's with Conexant Chipset
Item Description

Features:

● Brand new! Conexant chipset!

● Ports: RJ11 (common telephone/dial-up modem interface) USB (type-A Male)

●Data mode capabilities: V.92, V.90 56 Kbps

●Fax Mode capabilities: ITU TV. 17, V. 29, v.27ter, and V.21 Ch2 Group3 FAX

●Error Correction capabilities: V.42, MNP4-2

●Data Compression: V.44, V.42bis, MNP 5

●Operating Temperature: 0°C- 40°C

●No external power supply required

●System Support: Windows 98 / 2000 / XP / XP64 /Vista 32 & 64 /Windows7 32& 64, Windows 10, Linux
Note: Mac is not supported.



Applications:

●Make Voice Calls from your PC

●Send/Receive Fax with your PC

●Connect to the internet at 56k dial-up modem speeds

　
FAQ:

1. I canʼt receive fax?

BitWare, WinFax, and the Fax software thatʼs from Windows are supported by the modem. Eastfax may be unable to be supported by the Conexant modem esp. for receiving fax.

Besides, all modems donʼt support receiving or sending faxes while PC is turned off.

2. My windows7 canʼt find the modem?

The modem supports windows7 32bit and 64bit perfectly. Most windows7 OS can recognize the modem and install its driver automatically. However some compressing edition of windows7 canʼt do it. Then you need to install the driver from its CD drive.

3. How do I check whether the modem driver is correctly installed and working properly?

1). Go to Modem inside the Control Panel and check if there is any modem listed. Then click on the Diagnostics tab, highlight the com port where the modem is set and click on More Info. You should see a set of commands and responses listed. 2). Try to connect to an ISP.

4. My modem doesn't connect or stay connected at 56K?

Sometimes the phone line conditions are unable to support V90 connections and consequently are unable to operate at 56k. Your modem will perform better if you make a V34 connection instead. To accomplish this, the modem must be given the at+ms=v34 command. This can be done in a HyperTerminal session or added to the modem initialization (init) string. Please see the help files for your respective operating system for more information.

4. When I try to access my modem I get a blue screen?

First try to re-install the drivers. If the modem still doesn't work try updating the drivers. If the problem only recently started happening try removing any new hardware or software that was recently installed.

5. I am having problems connecting or my modem keeps on disconnecting.

This can sometimes be caused by other equipment that is connected to the same telephone line, by using a surge protection device on the telephone line or by faulty telephone wiring/cords. Try the following to see if it resolves your problem.

●Disconnect all other equipment from the telephone line, especially cordless phones and answering machines.

● Try connecting the modem to a different telephone outlet to see if the wiring is at fault. (Temporarily move the computer - do not use a long extension cord).

●Connect the modem to the telephone outlet directly using the telephone cord supplied with the modem/computer, do not connect via any surge protection device extension cords or adaptors.

5. I can't receive fax sometimes?

One reason may be that there is something wrong with the RJ11port of the modem. The metal spring may be oxidized. Can you use an eraser to clean the spring and try the modem once more?

Feature

l Dial up voice fax data modem

l Chipset set: Conexant 93010

l External modem

l USB 2.0 interface

l 56 Kbps download speeds

l V.92 lite protocol

l Up to 48 Kbps uploads

l 14.4 Kbps fax mode

l AT command set feature

l Quick connect and modem on hold features

l Supports auto dial, pulse dialing, auto answer, auto retrain

l Link LED

l Compact size



Modem

l V.90 (up to 56Kbps download, 48Kbps upload)

l V.90 (up to 56Kbps download, 38Kbps upload)

l V.34 (4.8 Kbps to 33.6Kbs)

l V.32bis (4.8Kbps to 14.4 Kbps)

l V.23 (75bps to 1.2 Kbps)

l V.22bis (50bps to 2.4 Kbps)

l V.21, Bell 103/ Bell212



Automode

l V.44/V.42bis/MNP 5 data compression

l V.42/MNP 2-4 error correction

l V.59 Diagnostic

l Hayes AT Command set

l TIES escape code

l Quick Connect(V.92)



Fax

l Group3, Class 1

l V.17

l V.29

l V.27ter



Voice Features

l ADPCM voice compression

l Digital Answering Machine



Telephony Services

l Wake Up on Ring

l Ring detection

l On/Off hook control

l Call progress monitor

l DTMF detection and generation

l Voice/fax/modem distinction

l Caller Id(optional)

l Modem on Hold (V/92)



Video Conferencing

l V.80/H.324 interface support



Operating System Support

l Windows 98, 98SE, ME, 2000, XP, Vista 32/64Bit, Windows 7 and Linux

l Power Consumption

l 50mA Operating Mode

l 0.5mA Stand-by

l Diagnostic Tool

l Modem Helper
86.80€
70.00€ + TAX 24%
Converter Planet VC-231 Ethernet over VDSL2 Converter (1 x RJ45, 1 x VDSL2/RJ11,17a/30a)
New
100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution
PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections.

Implementing with Existing Telephone Copper Wires
The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network.

Delivering High-Demand Service Connectivity for ISP / Triple Play Devices
The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.

Easy & Flexible Installation
The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection.

Providing Superior Upstream and Downstream Transmission Performance
The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.

Description

network
Data transfer rate (max)
100 Mbit / s
Converter input interface
100Base-TX
Networking standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet Interface Type
Fast
Ethernet LAN data transfer rates
10,100 Mbit / s
Auto MDI / MDI-X
Duplex System
Full, Half
Connectors and Interfaces
transmission technology
Wired
Ethernet LAN ports (RJ-45)
1
RJ-11 ports quantity 1
power
Maximum transfer distance 1400 m
design
Built-in NO energy
input voltage 5
electricity 2
Power consumption (typical)
6.6 W
Certificates
FCC Part 15 Class A, CE

operating conditions
Temperature range in operation 0 - 50 ° C
Storage temperature range -10 - 70 ° C
Humidity in operation 10 - 90%
Humidity (non-condensing) 10 - 90%

Weight & dimensions
width 9,7 cm
depth 7 cm
height 2,6 cm
weight 199 g
CONVERT-ETHERNET TO VDSL2 - 30a VC-231 100Mbps
[cod0029778]
178.99€ 167.40€ -6%
135.00€ + TAX 24%
Cisco Catalyst 9200L Managed L3 10G 48 Port Ethernet (100/1000/10000) Grey
Last Item
Cisco Catalyst 9200L.
Switch type: Managed,
Switch layer: L3.
Basic switching RJ-45
Ethernet ports type: 10G
Ethernet (100/1000/10000),
Basic switching RJ-45
Ethernet ports quantity: 48.
Full duplex. MAC address table: 16000 entries,
Switching capacity: 176 Gbit/s.
Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE....
Power connector: AC-in jack
SWITCH-CISCO CATALYST 9200L MANAGED L3 10G LAN
[cod0029631]
2,750.00€
2,217.74€ + TAX 24%
Cisco C9300L-24T-4X-E Catalyst 9300 24-port fixed uplinks data only, 4X10G uplinks, Network Essentials
Offer
An easy, convenient connection for your computers is what you can expect with the C9300L-24P-4X-E switch from Cisco. Share your network resources throughout your entire business with Cisco's rack-mount switch and easily connect all computers, phones and access points within your IP network. Thanks to the PoE (Power over Ethernet) cable, it can supply other terminals with electrical power, saving you the hassle of extra power cables and installations. Cisco's C9300L-24P-4X-E switch has 24 x 10/100/1000BASE-T as well as an additional 4 x SFP+ port. The switch is stackable.

Order now — experience exceptional quality and all-round excellent service from order to delivery.

Catalyst 9300L 24-port PoE+ 4x 10G Uplink Switch, Network Essentials
A DNA licence is required for operation. (see accessories). Other durations are available.

Product information Cisco C9300L-24T-4X-E
Catalyst 9300 24-port fixed uplinks data only, 4X10G uplinks, Network Essentials
Enclosure Type: An Rack montierbar
Construction: original
Subtype: Gigabit Ethernet
MAC Address Table Size: 32.000 entries
RAM: 8 GB
Ports: 24 x 10/100/1000 + 4 x 10 Gigabit SFP+ (Uplink)
Flash Memory: 16 GB
Jumbo Frame Support: 9198 Byte
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Device Type: Switch - 24 Anschlüsse - L3 - stapelbar
Features: Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE-Unterstützung, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Clas
Routing Protocol: OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, Policy-Based Routing (PBR), RIPng, MSTP
Capacity: IPv4-Routen: 32000 ¦ IPv6-Routen: 16000 ¦ Multicast Waage: 8000 ¦ QoS Scale-Eingänge: 5120 ¦ ACL Staffeleinträge: 5120 ¦ Geroutete Ports: 416 ¦ VLAN-Unterstützung: 4094 ¦ Switched virtual interfaces (SVIs): 1000
Performance: Schaltleistung mit Stacking: 448 Gbit/s ¦ Switching-Kapazität: 128 Gbps ¦ Weiterleitungsrate: 95,23 Mpps ¦ Weiterleitungsrate mit Stacking: 333,33 Mpps
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3bz
Interfaces: 24 x 1000Base-T RJ-45 ¦ 4 x 10GBase-X SFP+ Uplink
3,790.00€
3,056.45€ + TAX 24%
Newsletter