The Witura's WT-1010C2 GSM is a back-up alarm system that can be connected to any alarm. If the fixed telephone is cut by an attacker or a malfunction, the GSM and communication dialer will determine the line cut and send an alarm signal to the police, homeowner or signal reception center.
This GSM communication is used in Banking, ATMs, jewelery shops, homes, shops and where double protection is required on your property.
It has automatic control and reboot function. It can continuously monitor the system status and when there is a problem with the SIM card or the backup of the alarm and it does not work properly, the system will automatically restart.
The design of the WT-1010 features 3 relay outputs to achieve remote control. For example, you can use it to turn on / off lighting, air conditioning, remote refrigerator with SMS.
Automatic dialing to 8 phone numbers. The GSM dialer will also send SMS to 8 programmable mobile numbers to alert the user that the PSTN line has been cut off or not available.
Low power consumption. The GSM module uses 30mA in idle state and 260mA when transmitting an alarm
Available for 850/900/1800 / 1900MHz Frequency Band GSM ALARM for: Boat
Caravan
Container
Photovoltaic parks etc.
It is the ideal solution for your office communications needs. It provides your company with an economical and flexible solution allowing the use of an existing GSM network. And it is particularly useful in areas where there is no traditional telephony reception (OTE). This advanced, high-performance and high-end terminal supports the latest communication standards, as well as connectivity with call centers for lower communication costs, since it converts calls from fixed to mobile to mobile to mobile calls. : Compatibility with all Central Security Systems and Transmission at Signal Receiver.gsm works when the telephone line is cut
Ability to operate on all Mobile Networks operating in Greece.
PSTN Backup Mode.
In case of interruption of the OTE telephone line, calls are automatically made via Mobile Telephony.
It checks the correct operation of the SIM card and the signal levels of the mobile telephony.
Sending of text messages in case of interruption of OTE, PPC.
Ability to arrest and disarm the system as well as trigger costs
with SMS or application on android kai iphone.
Three digital inputs: Send messages when you activate the inputs or call the registered numbers or send a signal to the Signal Receiver.
Three digital outputs: It has three outputs, a 300mA open collector type and a relay power supply.
This way we can turn on and off various remote devices.
Can be connected to extra relay board 30A (VS-06).
It can accept up to 100 users.
It has a rechargeable battery to operate even with power failure.
It also has a screen for system settings and information, and has an LED for power and signal control.
It has an antenna with 3 meters cable.
Very low power consumption requires 30mA on hold and 260mA in call status.
Ease of placement on wall and / or table. It is a system of integrated and modern communication between the alarm and the Signal Receiver Center (ARC). So far, the communication between the alarm and the CLS is via terrestrial telephone line using the 4 + 2 (previously) protocol, Contact ID and SIA . With this method the ACS is only updated in the following cases: When arming-disarming the system. From a possible violation that may arise. From a 24-hour test set by the technician. The resulting problem is that when the connection of the telephone line is interrupted, the ACS is also stopped. A solution to this problem is the use of GSM gateways.
