Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 130g
Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes
The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.
Review of Zhanlida T-7000 glue 110ml
Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets.
This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.
The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.
The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.
This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.
Step-by-step instruction on the use of T-7000 glue
Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:
Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle
Zhanlida recommendations:
T-7000 Contact adhesive can be used on many materials but Zhanlida recommend it as the staple choice for cellphone repair, tablet repair when you need adhesive with black color, its solid content, curing time and viscosity make it a great strong adhesive.
Features:
- Water resistant
- No powder residue
- Black colour
- Precision applicator with pin-in-lid design to prevent blockage.
- Quick and easy to clean overspill
- Quick cures in 3-5 minutes (depending on material)
Specification:
- Solid Content: 30% – 35%
- Colour: Black
- Size / Liquid measurement: 110ML
- Cured Hardness: 65-80B
- Concentration / Viscosity: 4800mpa.s
- Temperature range: -35°c ~ +90°c
- Curing time: 3-6 Minutes (Quick) 24-48 Hours (Full)
Differences of different cellphone repair adhesives:
To be short, these adhesive all can meet your cellphone frame repair requests, the main difference are as below:
- T6000, clear high temperature resistant glue, if you need adhesive with such performance, please
- T7000, it is black colour, if you need adhesive in black color.
- T8000, it is clear colour, if you need cellphone repair adhesive in transparent clear color.
- T9000, it is also clear colour, the addition performance is that this adhesive no harm to Acrylic materials, if you need such performance.
- T9000S, it is also black colour, the addition performance is that this adhesive no harm to Acrylic materials, if you need such performance.
- T Hard, also called ZHANLIDA T, is black color, it is updated from T7000 + T9000S which combined the advantages of both and made its durability better, its price higher than T7000 and T9000S.
- S Medium, also called ZHANLIDA S, is Ivory color, if you need adhesive in such color.
