The Irida GPRS is a stand-alone GSM remote control. The product has 4 independent outputs for activation or deactivation (with or without time delay) devices. It also has four analog inputs for connection to temperature sensors, pressure, humidity, etc., Or any other system which provides indications via analog outputs. (Different analog inputs can be used as additional digital inputs). It also has 4 digital inputs for connecting devices with N.O. - N.C. outputs or signals from alarm or directly from natural gas systems, motion detection or fire etc. General technical characteristics:
VOLTAGE 12 - 24 VDC
AVERAGE CONSUMPTION IN PEACE 40 MA
CONSUMPTION OF EMISSION 80 MA
PROGRAMMING PORT RS232
Four output relays 1A / 24VDC
4 DIGITAL INPUTS
4 ANALOG INPUTS
MODULE QUAD BAND GSM / GPRS
DIMENSIONS 100X120X22 MM
INDUSTRIAL BOX TRACK
TECHNOLOGY SMD
CERTIFICATE CE safety COMPLIANCE
GREEK PRODUCT
Activation and deactivation of the devices the user has connected may be remotely controlled by the following methods:
With commands via SMS
The apparatus receives commands from a predefined telephone number (supervisor) or any telephone number with a code.
Through missed, freephone on device
(Using the call number identification service) from a mobile or fixed phone to avoid writing and sending messages, which costs time and money, you can make a simple phone call and send a command to IRIDA to perform some predefined tasks
By keywords sent by the user via SMS
You can program up to 8 different keywords (up to 10 characters of each word), which, like the latter, are stored in memory and execute the corresponding planned orders.
Eight different combinations of alarm signals
Each alarm can be automatically programmed to send SMS or make missed call (or both) to a specific phone number, depending on the condition of combined inputs (digital and analog) and outputs, or depending on the status of any independent input . Moreover, when the device receives an alarm signal instructs the outputs, if necessary, to take immediate action.
predefined messages
If you hit alarm, except the message that alerts the user, the device can send the corresponding phone number a predefined message (eg. Address and the area where the alarm) which has written and saved in the memory of the user device . There are 8 storage predefined messages, each of which corresponds to an alarm.
Disarm and fittings
As with any alarm system, if you want to cancel the operation of an alarm without changing the programmed parameters, you can individually disarm or re any of the four alarms via mobile phone SMS or missed call.
connectivity GPRS
The Irida GPRS model has the communication-data transfer capability via GPRS service, if it is provided. With this service the user can control the home or remote control from anywhere around the world by tracking in real time or through regular emails.
Characteristics
Compact size: Easy to install. External Dimensions (mm): 94x64x26mm
Compatible with all GSM: Simply insert the SIM card and you're ready. Dual Band compatible with all Greek networks 900/1800 MHz
Easy programming: programmable with simple commands via sms or serial port with IridaSoft.
Four output relays: 4 relay outputs (120V / 0.5A)
4 analog inputs: 0 ~ 5Volt for instrumentation. The inputs can be used as digital inputs.
4 digital inputs: 4 digital input to monitor the status of the monitored devices
Commands SMS: Checking the device via SMS or missed call. Obtaining information about the status of the inputs via sms.
Supply voltage: 12V DC: Device Consumption (idle): 50mA consumption during transmission (dialing): 500mA.
Delivery in 3-5 days: Send internationally. About 3 days delivery to Europe and about 5 abroad.
Remote IRIDA GSM / GPRS
Wireless Remote Control via Mobile Phone / Telemetry / Alarm
4 independent outputs for activation or deactivation (with or without time delay) devices plugged into these outlets either at home or in the factory. Examples of such devices are: various electric or electronic household appliances, heaters, lights, alarms and equipment for the production and industry, ventilation, heating and cooling systems, pumping stations, water supply and irrigation systems etc. Besides controlling ON - OFF, the user can enter and store the time delays (in minutes and seconds), or can use the XOR function to automatically switch from one state to another (oN or OFF), allowing the intermittent mode AGRICULTURE device.
4 analogue inputs for connection to temperature sensors, pressure, humidity, etc., Or any other system which provides indications via analog outputs. (Different analog inputs can be used as additional digital inputs).
4 digital inputs for connecting devices with N.O. - N.C.exodousi signals from alarm or directly from natural gas systems, motion detection or fire etc.
4 independent timers for each relay output with time (1s. - 999min).
