Radio specifications
RF technologies
Max RF power
2G, 3G, 4G, WiFi, GNSS
33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi
Mobile antenna 690/900/1800/1900/2100/2700 MHz, 50 Ω, VSWR < 3.2, gain** 3.5 dBi, omnidirectional, FAKRA D
female connector
Power adapter Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
WiFi antenna 1575.42~1602 MHz, 2.2-5 VDC, VSWR < 1.5, active total gain** 26 dB (typ.), RHCP polarization, FAKRA C
female connecto
FEATURES
Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
4
Firmware update from sever, automatic notificationFOTA
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logWEB UI
SSH (v1, v2)
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
SSH
SMS
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
Teltonika Remote Management System (RMS)
TR-069
RMS
DATASHEET // RUT850
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
FIRMWARE / CONFIGURATION
FIRMWARE CUSTOMIZATION
3 x connection type status LEDs, 1 x WiFi status LED, 5 x connection strength LEDs, 1 x Power LED
1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Status LEDs
SIM
Update FW from file, check FW on server, configuration profiles, configuration backup, restore pointWEB UI
Update FW/configuration from server
Update FW/configuration for multiple devices
FOTA
RMS
Update FW without losing current configurationKeep settings
RutOS (OpenWrt based Linux OS)Operating system
Busybox shell, Lua, C, C++
GPL package with built environment provided
Supported languages
Development tools
1 x 4 pin DC connector
2 x FAKRA connectors for LTE, 1 x FAKRA connector for GNSS
Power
Antennas
Reboot/Factory reset buttonReset
PHYSICAL SPECIFICATION
Plastic housing, plastic panels
131 x 18 x 79 mm
Casing material
Dimensions (W x H x D)
115 gWeight
POWER
9 – 30 VDC, reverse polarity protection, overvoltage protection up to 60 VDC, surge protection >66 VDC 10us maxInput voltage range
4 pin DC power socket
< 5W
Connector
Power consumption
LOCATION TRACKING
GPS, GLONASS, BeiDou, Galileo and QZSSGNSS
GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA 0183
Coordinates
NMEA
Supported server software TAVL, RMSServer software
Location without using GPS, get approximate location based on mobile tower on RMS
Hot start < 2.5 s, Warm start < 26 s, Cold start < 35 s
Mobile Network Geolocation
Startup
55 simultaneous satellites channelsTracking
-157 dBM
< 1.5 m
Sensitivity
Accuracy
Configurable multiple geofence zonesGeofencing
MONITORING & MANAGEMENT
Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
5
EMI IMMUNITY
Draft EN 303 446-1 V1.1.0Standards
EN61000-4-2:2009
EN 61000-4-3:2006, A1:2008 and A2:2010
ESD
RS
EN 61000-4-4:2004EFT
EN 61000-4-6:2009CS
DATASHEET // RUT850
RF
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1, EN 303 413 V1.1.0
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
EN 50665:2017, EN 62311:2018
STANDARD PACKAGE CONTAINS*
• Router RUT850
• Power cable (2 m)
• 2 x LTE antennas (adhesive, FAKRA-D, 3 m cable)
• 1 x GNSS antenna (adhesive, FAKRA-C, 3 m cable)
• 2 x Screws
• 2 x Adhesive tape profiles
• 2 x Hook and loop profiles
• SIM needle
• QSG (Quick Start Guide)
• RMS Flyer
• Packaging box
