| Precision specifications |
AC voltage
(40 Hz to 500 Hz)1 |
Range |
Resolution |
Accuracy |
6.000 V
60.00 V
600.0 V |
0.001 V
0.01 V
0.1 V |
1.0 % + 3 |
| DC voltage |
6.000 V
60.00 V
600.0 V |
0.001 V
0.01 V
0.1 V |
0.5 % + 3 |
| Exchange millivolts |
600.0 mV |
0.1 mV |
3.0 % + 3 |
| Diode test2 |
2.000 V |
0.001 V |
10 % |
Resistance
(ohm) |
400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ |
0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ |
0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3 |
| Capacitor3 |
50.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF |
0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF |
2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5 |
Frequency4 Hz
(10 Hz – 100 kHz) |
50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz |
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz |
0.1 % + 3 |
| Duty cycle4 |
1 % to 99 % |
0.10 % |
1 % typical case5 |
AC current
(40 Hz - 200 Hz) |
4.000 A
10.00 A |
0.001 A
0.01 A |
1.5 % + 3 |
| DC |
4.000 A
10.00 A |
0.001 A
0.01 A |
1.5 % + 3 |
- All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
- Typically, the open circuit test voltage is 2.0 V and the short circuit current is < 0.6 mA.
- The parameters do not include errors due to test lead capacitance and capacitor substrate (up to 1.5 nF in the 50 nF range).
- All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
- Typically, the frequency is 50 Hz or 60 Hz and the duty cycle is 10% to 90%.
|
| Features |
Overload protection |
Input impedance (nominal value) |
Common mode rejection ratio |
Normal mode rejection ratio |
| AC voltage |
600 V 1 |
>10 MΩ <100 pF 2 |
>60 dB at 50 Hz or 60 Hz at DC current |
− |
| Exchange millivolts |
600 mV |
>1M, <100 pF |
>80 dB at 50 Hz or 60 Hz |
− |
| DC voltage |
600 V 1 |
>10 MΩ <100 pF |
>100 dB at 50 Hz or 60 Hz at DC current |
>60 dB at 50 Hz or 60 Hz |
- Up to 6 x 105 V Hz
- For medium voltage (alternating current), the input impedance is approximately 1 MΩ.
|
| General technical indicators |
| The highest voltage applied to any terminal and ground |
600 V |
| Display (LCD) |
6000 counts, updated three times per second |
| Type of battery |
Two AAA batteries (NEDA 24A, IEC LR03) |
| Battery life |
At least 200 hours |
| Temperature |
| Operating temperature |
0 °C to 40 °C |
| Storage temperature |
-30 °C to 60 °C |
| Relative humidity |
| Working humidity |
No condensation below 10 °C
≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C |
| Working humidity, 40 MΩ range |
≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C |
| Altitude |
| Working elevation |
2000 m |
| Storage altitude |
12,000 m |
| Temperature coefficient |
0.1 X (specified accuracy) / °C (<18 °C or >28 °C) |
| Current input fuse protection |
11A, 1000V fast-melting type, must use Fluke designated parts |
| Volume (height x width x length) |
142 mm x 69 mm x 28 mm |
| Weight |
200 g |
| Protection level |
IEC 60529: IP 40 |
| Safety |
IEC 61010-1: 600 V CAT III, pollution degree 2 |
| Electromagnetic environment |
IEC 61326-1: Portable |
| Electromagnetic compatibility |
Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment)1 |
| 1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment. |
