The CXL 2-3 GHz is an ultra broad-banded, 0 dBd, vertically polarized, omnidirectional rod-type base station and marine antenna for the 2 - 3 GHz band.
The 1” revolving nut mounting system is standard throughout the marine sector, and several different mounting brackets are available, making it possible to install the antenna either on the masthead by use of FLG or SMR 2, side-mounted on the mast (SMR 1) or mounted on a cross-beam (FLG). Also, the antenna can be mounted on deck or rooftop by means of the FLG.
The higher the antenna is mounted, the better coverage. Avoid mounting the antenna parallel to or in the neighbourhood of other metal parts, such as masts, supporting wires etc., otherwise the SWR and the radiation pattern may be strongly influenced.
A conical glass fibre tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.
| TYPE | PRODUCT NO. |
| CXL 2-3 GHz |
100000204 |
| ELECTRICAL | |
| MODEL |
CXL 2-3 GHz |
| ANTENNA TYPE |
½ λ coaxial dipole, broad-banded |
| FREQUENCY |
2000 - 3000 MHz |
| IMPEDANCE |
Nom. 50 Ω |
| POLARIZATION |
Vertical |
| GAIN |
2 dBi 0 dBd |
| BANDWIDTH |
≥ 1 GHz @ SWR ≤ 2.0 |
| SWR |
≤ 2.0 |
| MAX. POWER |
100 W |
| MECHANICAL | |
| TEMP. RANGE |
-30°C → +70°C |
| CONNECTOR |
N-female |
| WIND SURFACE |
Approx. 0.006 m² |
| WIND LOAD |
Approx. 8 N @ 160 km/h |
| COLOUR |
Marine white |
| MATERIALS |
Shroud: Polyurethane-coated glass fibreMounting bracket: Chromed brass |
| TOTAL HEIGHT |
Approx. 230 mm |
| DIA. AT TOP END |
14 mm |
| DIA. AT BOTTOM END |
16 mm |
| WEIGHT |
Approx. 180 g |
| MOUNTING |
On 1” RG (G1”-11) threaded water pipe or on optional mounting brackets (see below) |
To top
