AOUYE

Compatible with models:
453 Soldering Iron
701 Repair System
899 Repair System
899A+ Repair System
906 Repair System
909 Repair System
936 Soldering Station
936A Soldering Station
937 Soldering Station
937+ Soldering Station
968 Repair System
Int768 Repair System

Tip for soldering station AOYUE 936A/937 900-T-1S BEVEL TYPE CHINA

Desoldering tip Aouye 701 ( A1006 ) 1,5 mm

Hot Air Nozzle BGA Aouye A1198 (ROUND) 12.0mm Straight Single Nozzle.
Compatible with models ,
Aoyue :
768 Repairing Station
850 Rework Station
850A+ Rework Station
852 Rework Station
852A+ Repairing System
852A++ Repairing System
857 Rework Station
857A++ Rework Station
860 Rework Station
899 Repairing System
899A+ Repairing System
906 Repairing System
908 Repairing System
908+ Repairing System
909 Repairing System
986 Repairing System
6028 Repairing System
6031 Repairing System
8032 Hand Held Hot Gun
8032A++ Hand Held Hot Gun
8208 Rework Station
Int 738 Repairing System
Int 2702 Lead Free Repairing System
Int 2738 Lead Free Repairing System

Circular Lamp for cold Light Magnifier Lamp Aoyue 929 (Spare part)

Hot Air Nozzle Aouye A4343 (42x42mm)

Hot Air Nozzle Aouye A1010 (9x9mm)

Hot Air Nozzle Aouye (4141) 40x40mm

Hot Air Nozzle Aouye (3636) 35x35mm.

Hot Air Nozzle Aouye A3232 (31x31mm)

Hot Air Nozzle Aouye A3030 (29x29mm)

Hot Air Nozzle Aouye A2828 (27x27mm)

Hot Air Nozzle Aouye A1919 (18x18mm)

Hot Air Nozzle Aouye A1616 (15x15mm)

Hot Air Nozzle Aouye A4545 (44x44mm)

Replacement hot air heating element for the Aoyue / Hakko / WAEC 8032 series.

Compatible with hot air station Aoyue Int852A++, Int8661, 8208, 899, 899 A+, 8032A++

Hot Air Nozzle AOYUE SOP (5.6x13mm) SMD Rework Station

Heating Element AOUYE C031 Int3210 Spare Part

This shape is All-round type which can be used from any direction and it is available for any works. Therefore it is not only accessible for the soldering beginners but also suitable for the experienced.
Easily Replaceable Solder Tip Cartridges... Solder tip cartridge simply pulls out of the soldering iron for quick change between tips. Cartridge incorporates the heating element providing maintenance free replacement.
Length : 12mm
Form : Conical Type, 0,4mm aperture.
Compatible with below models:
BGA 9000A Rework System
720 Infrared Welding System
732 Infrared Welding System
2900 Lead Free Soldering Station
2901 Lead Free Soldering Station
2702 Lead Free Repairing System
2703 Lead Free Repairing System
2738 Lead Free Repairing System
6031 Sirocco Lead Free Repairing System.
Aoyue, Hakko, Xytronic and Gordak reparing system.

Form 11,3 x29 IC-Box
SOP 13x28
Aoyue air nozzle inside fitting diameter of 22mm
Compatible Model:
Aoyue
768 Repairing Station
850 Rework Station
850A+ Rework Station
852 Rework Station
852A+ Repairing System
852A++ Repairing System
857 Rework Station
857A++ Rework Station
860 Rework Station
899 Repairing System
899A+ Repairing System
906 Repairing System
908 Repairing System
908+ Repairing System
909 Repairing System
986 Repairing System
6028 Repairing System
6031 Repairing System
8032 Hand Held Hot Gun
8032A++ Hand Held Hot Gun
8208 Rework Station
Int 738 Repairing System
Int 2702 Lead Free Repairing System
Int 2738 Lead Free Repairing System

Stand-by : Up to 240 h (3G)
Talk time : Up to 14 h (3G)
Music play : Up to 50 h
Talk time: Up to 14 hours on 3G
Internet use: Up to 10 hours on 3G, up to 10 hours on LTE, up to 11 hours on Wi‑Fi
HD video playback: Up to 11 hours
Audio playback: Up to 50 hours

You will receive a temperature sensor B+C from Aoyue suitable for the Infrarred soldering station 732 Quartz (IR), Quartz (IR) Preheater 853A++

Heating Element AOYUE C012 for Handle B016 for 9378 / 90768+ / 866

Soldering Iron Handle unit set Aouye B016 Parts models 9378, 90768+, 866

Temperature sensor Aoyue 732 version (A) 4 pin connector.

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H4545A
IC-Case BGA 44x44 mm
Nozzle-Dimension 45x45 mm
Compatible Aoyue stations Int732 Quartz (IR)
Compatible Aoyue stations Aoyue Int732 Quartz (IR)

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H4141A
IC-Case BGA 40x40 mm
Nozzle-Dimension 41x41 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)

Upgrade with this set your Aoyue quartz preheater 883 with a hot air tripod.

The set includes a stand that can be easily screwed into the already hole provided on Preheater - for mounting, loosen the Allen screw on the rear cover of the preheater and screw the bracket.

The hot air gun holder which is in the height and alignment fine adjustment and summarizes handles up to a diameter of 41 mm.

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H1919A
IC-Case BGA 18x18 mm
Nozzle-Dimension 19x19 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H2828A
IC-Case BGA 27x27 mm
Nozzle-Dimension 28x28 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)

Main PCB Board for AOUYE 768

Closed loop temperature controlled Soldering station.
PTC ceramic heater and removable tip design.
High power heating element for fast heat recovery.
Temperature control knob for easy adjustment.
Portable and lightweight system.

MAIN STATION
Voltage Input : available in 110V / 220V
Station Dimensions: 51(w) x 59 (h) x 85 (d) mm
Weight: 235 grams
Power Consumption: 75W
Temperature Range: 200°C 480°C
Heating Element PTC Ceramic heater
PTC ceramic voltage: 110/220 V .jpg

The IR-Heating element should be replaced if it is damaged or broken. In most cases damaged heating elemens weaken rapidly the efficiency of heat output.

Dimensions : 75 x 73 x 45 mm
Weight [kg] : 0.142
Power : 500 W
Temperature range : Infrared: 0-480°C
Compatible Aoyue stations : Aoyue 732
Heating Element : Preheater IR - Infrared 500W

AOYUE 3210 Lead-free Soldering Station Repair System Soldering Iron Welding Tools
Features:
Microprocessor-controlled with digital display of actual and set temperature.
ESD safe station and closed loop control of temperature for precision soldering.
Large temperature control knob for easy adjustment of set temperature.
High power heating element allowing faster heat recovery suitable for lead free processes.
High performance ceramic heater with removable tip design. See page 60 for available tips.
Power saving feature with auto sleep and wake up function with the integrated vibration sensor.
Programmable sleep timer to allow maximum power savings depending on usage.
Lead free compatible soldering iron with replaceable tip design.
Soldering station LEAD FREE AOUYE Int3210 space saving machine.
• short heat-up times
• big temperature adjustment range
• electrostatically safe discharge (ESD SAFE)
• built-in temperature sensor ensures a constant temperature
• the digital display shows the set temperature as well as the current temperature

Antistatic design of AOYUE Int 3210 which prevents the PCB from being damaged and secures the electronic components, for example damage resulting from static charging. The soldering temperature is shown by means of digital display and can be reached very quickly due to the 70W ceramic element. The station has got a very good and precise temperature control which allows a careful and safe soldering and desoldering.

Wide range of available soldering tips from Aoyue T-Series.

Digital smd hot air rework station 852 whith 4 nozzle.
Hot-Air Nozzles
1124 round Ø 2,4 mm
1130 round Ø 4,4 mm
1196 round Ø 7 mm
1197 round Ø 9 mm

Description



The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852+ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle andand at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles.



- CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element.
The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time! ! The station is completely operational after the screw removal.You need only 5 minutes to do that and then you have a completely functional hot air station.

The Aoyue 853A+ Preheater works with a fast heating element Quartz IR (Infrared) which is easily and continuously adjustable.The gentle and uniform heating prevents the printed circuit board from being distorted, overheated or damaged. A large digital display with its display options allows you to monitor the selected settings.

The pre-heating system with a total heat output of 500 Watt and an adjustable temperature range from 80°C to 380°C provides all that is necessary for working on the pc boards or reapairing them. Accurate temperature values can be measured any time with the help of the external dual temperature sensor.

Time and temperature settings can be saved and then run as automated programmes due to the user-defined profile. Additionally the preheating system offers three predifined rework-programms (time / temperature control) to suit different applications.

Almost all circuit boards can be safely fixed and worked on due to the integrated board holder. This flexible system allows the user to fix triangular and round boards without difficulties.

Non-contact soldering for high requirements.
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. Heating elements and nozzles conform to international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
The antistatic design as well as the microprocessor control of the 968A + multifunction repairing system prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy manageable. The built-in smoke absorber extracts the fume directly at the source where it is generated. The temperature of the soldering iron is showed on the digital display and can be adjusted by using the rotary knob allowing a fast and precise temperature setting.
The station informs the user via display about possible malfunctions at the sensors or at the heating elements. Another function of the station is the Aoyue Auto Cooling Function, it blows cold air on the heating element when the hot air is switched off until reaching a low temperature in order to extend the life of the heating element. The repairing system can also be used for heat shrink-tubing and is indispensable in the filed of chiptuning, repairing mobile phones, laptops and video game consoles.
high heating capacity
exact adjustment possibilities
auto cooling and follow up phase
SMD fine soldering iron
Blow nozzles in accordance with international standard
very fast heating suit
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), diese must be removed before using the station for the first time! After removing the safety transport the sation is fully operational. You need only 5 minutes to remove the red cross screw and then you have a functional station. The temperature and the air flow can be adjusted via "AIR" and "Heater".
able for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
AOYUE Int 968A+ Package Content:
1 unit Int968A+ Main Station with Hot Air Gun and holder.
1 pc. B003A Soldering Iron with Smoke Absorbing function
1 pc. 1124 Air Nozzle
1 pc. 1130 Air Nozzle (Single 4.4mm)
1 pc. 1196 Air Nozzle (Single 7 mm)
1 pc. 1197 Air Nozzle (Single 9 mm)
1 pc. 1313 Air Nozzle
1 pc. 2660 Soldering Iron Stand
1 pc. Filter Vacuum Cap
1 pc. Black Filter Pad (round)
1 pc. G001 IC Popper
1 pc. Power Cord
1 pc. Instruction Manual

Full digital automatic smd hot air rework station 852A+ whith 4 nozzle.
The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle and at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles as well as spare tips for the built-in vacuum pick-up(extractor), so that you can work WITHOUT additional costs



- CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element

Hot air soldering station Aouye int866 Preheater 3in1 SMD Rework Station, Sirocco Series, board holder, Heat gun, soldering iron 60 W, Quartz Preheater, temperature sensor, lead-free.
The Aoyue Int866 3in1 PCB Hot Air Rework Soldering Station that is equipped with a powerful 60 watt soldering iron for lead-free solder, hot air and a 400 watt Preheater, is the all-round solution for your workshop.

The antistatic design prevents the damage of the boards and the electronic components such as by static electricity. Of course, this station also disposes of a cooldown function so that cold air continuously cools the heating element after use. This increases the service life of the heater. The temperature control allows the soldering or unsoldering with the utmost care and security.

The station disposes of a practical holder for the hot air handle and the soldering iron, thus enabling a very light and easy to work. The amount of air and the temperature can be adjusted within a wide range. The jets of the station can be easily replaced, so that each component can be soldered with an optimum nozzle, air and temperature setting. Heating elements and nozzles conform to international standards and are suitable for most SMD components, such as LEDs, SOIC, CHIP, QFP, PLCC, BGA suitable.

The preheater, Aoyue Int 866, uses a fast heat up Quartz IR (infrared) heating element that is easily adjustable and infinitely variable. The gentle, uniform heating prevents the distortion, overheating and damage of the circuit boards. By a variety of display options, a large digital display allows the perfect control of the selected settings, temperatures and programs.

With a total heating performance of up to 400 watts and a steplessly adjustable temperature range from 100 ° C to 480 ° C, this system offers everything you need for extensive work and repairs on a variety of plates, boards and circuit boards. Accurate temperature measurements can be made using an external temperature sensor anytime and anywhere on the component.

With the integrated PCB holder almost all kinds of Printed circuit boards can be securely fixed and processed. This flexible system also allows an easy gripping of round or triangular boards without much effort.

You get the base station Aoyue 866 for lead-free soldering including the following accessories:
- Soldering Iron (B012) with 60 watts and 10 Soldering Tips
- Hot air unit with handle (4 nozzles)
- Soldering Iron Holder with dry sponge and tin scraper
- Aoyue 939 Vacuum Pickup Set (WilTec-type 91939).
- Lifting device (IC Popper)
- Aoyue Toolkit - Case

External Dual Temperature Sensor 500 Watt, 80°C - 380°C, Board Holder, User Defined Profile, Three Rework- Programs.

The Aoyue Station Int. 732 connects a big Preheater with a high power Quartz Top Heater (Gun) and lead-free soldering station.

With this station is possible to carry out 3 types of repairs on game stations.

• With the internal temperature sensor you can reball or resolder already soldered chipsets
• With the external temperature sensor you can control the manual rework process yourself
• The fully automatic reflow process can also be employed by the user.

By means of sensors, which can be attached to the PCB, a precise temperature control is posible, this reduces temperture-induced PCB board damages.
Two sensors are used to monitor and control the temperature, a further sensor serves for monitoring other areas of the PCB, that possibly contain temperature-sensitive components.

The 310x310mm sized Quartz-Preheater with 1500Watt reduces the PCB Bord-deformation. The 60x60mm sized Quartz-Gun works reliably with 500Watt to solder the BGAs.

The system is equipped with the new PCB Bord holding sytem from Aoyue, this multi-point holder has nine safely bolts to hold firmly the different board sizes.

The system is CPU controlled and has a digital display that is easy to use. The device has a built-in overheat protection that limits the temperature. The system limits automatically the temperature rise (industry standard), this amounts only to 3°C per second. This minimizes damaged of sensitive electronic components and ensures a clean operating process.

Operation of Aoyue Infrared Soldering Stations

The heating of the components results from the absorption der IR-radiation. Because the metal connections of the components only have a low absorption, that is they reflect the IR-radiation, the heat has to be conveyed to the soldering points mainly over the component itself, over the PC board which is also heated and the surrounding air. For this reason one works with both radiators (Preheater from the underside and IR-light from the upper side ), to heat or preheat the whole surrounding area of the soldering point. The temperature of the single components can vary greatly. The absorption depends on the material and the wave-length and this in turn depends on the temperature of the radiator. The heating of large and thicker SMDs is slower than that of small and thin SMDs.

The antistatic design of the Aoyue 720 reliably prevents PCBs and circuits from being damaged due to static charging. The ingenious Infrared (IR) soldering "Gun" is particularly suitable for the focused heatingof the components. The device has a large preheater with pc-board holder for heating uniformly the PC boards to be processed. The digital display enables an easy reading making the handling of the device easier. The IR gun is operated via foot switch, so that the hands are free to work.
Operating mode of Aoyue infrared soldering stations

The heating of the elements results from the absorption der IR-radiation. Because the metal connections of the components only have a low absorption, which means they reflect the IR-radiation, the heat has to be conveyed to the soldering points mainly over the component itself, over the PC board which is also heated and via the surrounded air. For this reason one works with both radiators (Preheater from the underside and IR-light from the upper side ) to heat or preheat the whole surrounding area of the soldering point. The temperature of the single components can vary greatly. The absorption depends on the material and the wave-length and this in turn depends on the temperature of the radiator. The heating of large and thicker SMDs is slower than that of small and thin SMDs.


The infr-red soldering has the following advantaged and disadvantages.

Advantages:
• Simultaneous soldering process with high efficiency
• Efficient and particularly suitable for serial products
• Easy handlind of the IR-unit, user-friendly
• Temperature of the largest SMDs (high pin count ICs) is the lowest

Disadvantages:
• Temperature profile necessary.
• Temperature of the single components can vary significantly. Small SMDs, for example single semiconductors can be easily overheated.
The Aoyue 720 is an ingenious Rework System as handy as a tool. It can be used to process micro BGA components in mobile phones computers, telephones, video game consoles etc. Handling and operation are simple to come to grips with and the station runs safely and efficiently. This station enables high performant rework applications for most modern systems like: BGAs, BGAs SMDs, SMT Connectors without overheating these components. The heat is generated by means of infrared waves (IR) and not with conventional hot air. The moving and placing of the components can be achieved without protection shield or other tools becuase no air flow is used for soldering.

By non-contact measurement the soldering and desoldering temperature is determined (at the IR-light source and the quartz preheater), simple, fast and safe. After being sucessfully soldered out BGAs can be soldered again in place. No expensive nozzles are needed, the unit is complete and fully operational. Due to the adjustable PC-board surface preheater the user avoids misplacing the components or their distortion. Using this rework system is as simple as placing components on an empty pc board. the built-in screen shield protects the user against IR-radiation.
- Foot switch
- Main station - includes massive stand
- PCB holder - installed on the device
- Infrared Gun
- Preheating station - fully built-in