Hot air rework stations

Lead free 70W soldering whith digital display for air and heater and 15 Volt power suply together and 4 nozzle.
One station does it all. A microprocessor controlled versatile equipment combining the geatures of hot air, soldering station and power source in full digital display.

Hot air gun 8032 input 220V

The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 8208 is easy to handle so that you have no problems when using the station! The housing is equipped with a practical holder where the hot air gun can be placed for its safe storage.
The turbine engine generates a natural soft air stream due to which the best soldering results can be achieved!
Perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
With integrated temperature sensor that ensures a constant temperature independent of the air stream rate that has been set.
Auto Sleep Mode Sensor! As soon as the hot air gun is docked on the heating element is beeing cooled down and stops heating- saves energy costs!
The station changes to Stand -By mode after one minute of not being used and when resuming its operation it will newly activate the preconfigurated values.
Wide temperature and air flow adjustment range.
The cold air cools off the heating element after use continuously, increasing the lifetime of the heating element.

Σταθμός SMD με 4 ακροφύσια

Digital smd hot air rework station 852 whith 4 nozzle.
Hot-Air Nozzles
1124 round Ø 2,4 mm
1130 round Ø 4,4 mm
1196 round Ø 7 mm
1197 round Ø 9 mm

Description The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852+ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle andand at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles. - CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element.
The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time! ! The station is completely operational after the screw removal.You need only 5 minutes to do that and then you have a completely functional hot air station.

Full digital automatic smd hot air rework station 852A+ whith 4 nozzle.
The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle and at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles as well as spare tips for the built-in vacuum pick-up(extractor), so that you can work WITHOUT additional costs - CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element

Preheater station 853 QUARTZ DIGITAL 500W whith 100-300 degree celsious.Compact preheating device preventing panel board distortion.
Fast heating and compact design.
Thermally stable with closed loop variable temperature control.
Emits air through carbonless brush system for longer usage life. Designed with hot and cool air adjustment especially suited for heating and cooling PCBs.Package content:
Main station, one pair G003 PCB magnetic holder. Power cord.

The Aoyue Preheater int853A works with a fast Quartz IR heating element. The antistatic design prevents PCBs and circuits from being damaged due to static charging. The station has no engine and is therefore noiseless. The Preheater is delivered with a pc-board holder, which helps fix the printed circuit board on the station.
Including Display and temperature adjust volume set.
CE, ROHS, ESD SAFE

New Hot Air AOYUE 857A++ SMD Digital Rework Station. The ideal hot air rework station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 857A++ is easy to handle and is equipped with a turbine pump that stands out due to optimum and constant airstreams. The station is clearly configurated and can be easily used! The temperture is indicated by the digital display, the values can be adjusted by a push button. Even an amateur can operate the station in a few minutes! You will also receive three different nozzles so that you can work without additional costs! The station is ready for use. You need only 2 minutes and you have a complete hot air station with which you can work.

Σταθμός SMD με 4 ακροφύσια

Hot air Rework station BK-868D with Display Led.
Display: LED
Power consumption: 700W
Air current: 120L/minute (Max.)
Handle length: 120cm (with wire)
Noise: Below 45db
Resistance between welding iron tip to ground: Below 2 ohms
Voltage of welding nozzle to the grounding: Below 2mV
Temperature range: 200 to 480 degrees Celsius
220V Europa plug
Including 3 round nozzle 1 small, 1 middle, 1 big

Short review BAKU BK-878L. Powerfull ESD-safe microprocessor controlled hot air soldering station suitable for soldering and desoldering the full range of SMD components. Temperature range 100 - 450 ºC. BAKU BK-878L is a powerfull ESD-safe hot air soldering station that is designed for soldering and desoldering operations with the full range of SMD components, including DIP, SOIC, CHIP, QFP, BLCC, BGA, etc. BAKU BK-878 hot air soldering station temperature range is 100 - 450 ºC.

Non-contact soldering for high requirements.
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. Heating elements and nozzles conform to international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
The antistatic design as well as the microprocessor control of the 968A + multifunction repairing system prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy manageable. The built-in smoke absorber extracts the fume directly at the source where it is generated. The temperature of the soldering iron is showed on the digital display and can be adjusted by using the rotary knob allowing a fast and precise temperature setting.
The station informs the user via display about possible malfunctions at the sensors or at the heating elements. Another function of the station is the Aoyue Auto Cooling Function, it blows cold air on the heating element when the hot air is switched off until reaching a low temperature in order to extend the life of the heating element. The repairing system can also be used for heat shrink-tubing and is indispensable in the filed of chiptuning, repairing mobile phones, laptops and video game consoles.
high heating capacity
exact adjustment possibilities
auto cooling and follow up phase
SMD fine soldering iron
Blow nozzles in accordance with international standard
very fast heating suit
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), diese must be removed before using the station for the first time! After removing the safety transport the sation is fully operational. You need only 5 minutes to remove the red cross screw and then you have a functional station. The temperature and the air flow can be adjusted via "AIR" and "Heater".
able for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
AOYUE Int 968A+ Package Content:
1 unit Int968A+ Main Station with Hot Air Gun and holder.
1 pc. B003A Soldering Iron with Smoke Absorbing function
1 pc. 1124 Air Nozzle
1 pc. 1130 Air Nozzle (Single 4.4mm)
1 pc. 1196 Air Nozzle (Single 7 mm)
1 pc. 1197 Air Nozzle (Single 9 mm)
1 pc. 1313 Air Nozzle
1 pc. 2660 Soldering Iron Stand
1 pc. Filter Vacuum Cap
1 pc. Black Filter Pad (round)
1 pc. G001 IC Popper
1 pc. Power Cord
1 pc. Instruction Manual

Hot air soldering station Aouye int866 Preheater 3in1 SMD Rework Station, Sirocco Series, board holder, Heat gun, soldering iron 60 W, Quartz Preheater, temperature sensor, lead-free.
The Aoyue Int866 3in1 PCB Hot Air Rework Soldering Station that is equipped with a powerful 60 watt soldering iron for lead-free solder, hot air and a 400 watt Preheater, is the all-round solution for your workshop. The antistatic design prevents the damage of the boards and the electronic components such as by static electricity. Of course, this station also disposes of a cooldown function so that cold air continuously cools the heating element after use. This increases the service life of the heater. The temperature control allows the soldering or unsoldering with the utmost care and security. The station disposes of a practical holder for the hot air handle and the soldering iron, thus enabling a very light and easy to work. The amount of air and the temperature can be adjusted within a wide range. The jets of the station can be easily replaced, so that each component can be soldered with an optimum nozzle, air and temperature setting. Heating elements and nozzles conform to international standards and are suitable for most SMD components, such as LEDs, SOIC, CHIP, QFP, PLCC, BGA suitable. The preheater, Aoyue Int 866, uses a fast heat up Quartz IR (infrared) heating element that is easily adjustable and infinitely variable. The gentle, uniform heating prevents the distortion, overheating and damage of the circuit boards. By a variety of display options, a large digital display allows the perfect control of the selected settings, temperatures and programs. With a total heating performance of up to 400 watts and a steplessly adjustable temperature range from 100 ° C to 480 ° C, this system offers everything you need for extensive work and repairs on a variety of plates, boards and circuit boards. Accurate temperature measurements can be made using an external temperature sensor anytime and anywhere on the component. With the integrated PCB holder almost all kinds of Printed circuit boards can be securely fixed and processed. This flexible system also allows an easy gripping of round or triangular boards without much effort. You get the base station Aoyue 866 for lead-free soldering including the following accessories:
- Soldering Iron (B012) with 60 watts and 10 Soldering Tips
- Hot air unit with handle (4 nozzles)
- Soldering Iron Holder with dry sponge and tin scraper
- Aoyue 939 Vacuum Pickup Set (WilTec-type 91939).
- Lifting device (IC Popper)
- Aoyue Toolkit - Case

Preheater PDS AOYUE 853A+ SMD Repair Rework Circuits PCB.
The Aoyue 853A + preheater uses a fast Quartz IR (infrared) heating element, which is easily adjustable and infinitely variable. The gentle, uniform heating prevents distortion, overheating and damage to the circuit boards. A large digital display made possible by a variety of display options, a good control of the selected settings. With a total output of up to 500 watts and a continuously variable temperature range from 80 ° C to 380 ° C, this system is all you need to extensive work and repairs on a variety of boards, boards and printed circuit boards to be able to make. The integrated circuit board holders almost all kinds of printed circuit boards and printed circuit boards can be securely fixed and processed. This flexible system allows for easy clamping of round or triangular boards easily.

The Aoyue 853A+ Preheater works with a fast heating element Quartz IR (Infrared) which is easily and continuously adjustable.The gentle and uniform heating prevents the printed circuit board from being distorted, overheated or damaged. A large digital display with its display options allows you to monitor the selected settings. The pre-heating system with a total heat output of 500 Watt and an adjustable temperature range from 80°C to 380°C provides all that is necessary for working on the pc boards or reapairing them. Accurate temperature values can be measured any time with the help of the external dual temperature sensor. Time and temperature settings can be saved and then run as automated programmes due to the user-defined profile. Additionally the preheating system offers three predifined rework-programms (time / temperature control) to suit different applications. Almost all circuit boards can be safely fixed and worked on due to the integrated board holder. This flexible system allows the user to fix triangular and round boards without difficulties.

BAKU BK-702\B is a powerfull hot air soldering station specially designed for soldering and desoldering work with SMD components such as SOIC, QFP, PLCC, BGA, etc. BAKU BK-702A is a great choice for repairing small electronics, such as mobile phones and video cameras, as well as domestic appliances.
BAKU BK-702B Hot Air Soldering Station Technical Specifications
Power Input 220 V / 50 Hz
Power Consumption 350 W
Temperature Range 100 °C - 500 °C
Air Pump Type diaphragm
Pump Power 45 W
Airflow 0.3-24 L/m
Weight 5,3kg
BAKU BK-702A Hot Air Soldering Station Application Complete range of rework applications in medium and large scale service centers
Mobile and radio systems devices repair
Cellular phones, PDAs, handhelds, laptops, notebooks, and motherboards repair BAKU BK-702A Hot Air Soldering Station Package Contents BAKU BK-702A soldering station module (1 pc.)
Soldering iron (1 pc.)
Stand for soldering iron (1 pc.)
Hot air gun (1 pc.)
Power cord (1 pc.)
User manual (1 pc.)
Noozle ( 5 pc.)

About the product
1. Sensor closed loop, microcomputer can control temperature automaticly with LED display, high-power heating element, rapid heating, temperature accuracy and stability, will not affects if has wind, the real lead-free soldering desoldering.
2. Adjustable air flow, air volume and a gentle wind, convenient temperature regulation, can be adapted to a variety of uses.
3. The handle is equipped with sensor switch, when you grasp hand held, it will work, and when you put it down, it will stop work.
4. The system is equipped with automatic cold air function, when cooled, automatically enter power-saving state, can prolong the life of the heating element and protect the hot air gun.
5. A compact body shell designs, durable, beautiful, occupying a small work table. Brushless fan has extremely long life, minimal noise.
6. Safe solder QFP, PLCC, BGA and other temperature-sensitive components. Solder Equipment
Operating Voltage: AC 26V+/-10% 50Hz
Output Power: 40W+/-10%
Temperature Range: 200 ~ 480 Degree Celsius
Temperature stability: +/-2 Degree Celsius (Static state)
Setting mode: Buttons to adjust
Display: Graduation
Temperature lock mode: Knob
Tip-to-ground impedance: <2ohm
Tip-to-ground voltage: <2mV
Tip: BST900-M-T-I
Heater: Four core ceramic heater

Switchboard
Rated voltage: AC 220V±10% 50Hz
Total Power: 500W±10%(Max)
Work Environment: 0~40? Relative humidity<80%
Storage Temperature: -20~80? Relative humidity<80% Hot air gun parts
Operating Voltage: AC 220V±10% 50Hz
Output Power: 450W±10%
Output Power: 450W±10%
Temperature Range: 100?~480?
Gas type: Pump air
Gas flow: 28L/min(Max)
Display: LED digital display
Noise: Less than 45dB Solder Equipment
Operating Voltage: AC 26V±10% 50Hz
Output Power: 50W±10%
Temperature Range: 200?~480?
Tip: BST900-M-T-I
Heater: Four core ceramic heater