Solder Flux UV Paste Liquid

Low viscosity, with visible light curing, curing ability strong shadow,
Light transmission rate of at 550nm: >99.5% (>99%), The viscosity of Brookfield RVT, 25 C, 20rpm, the spindle 3: 900-1200,The hardness of ASTM D2240E typ: 13-25,The curing conditions UVA250nm-420nm: 1500 Dielectric constant of 1MHz: 2.0-2.3, Solid refractive index Abbe at 25 C: 1.48, Haze, ASTM D1003: 0.35% (<0.5%),The yellow index of ASTM D1925/C2: 0.6 (<1.0)

ProductKAISI Green Black UV Curing Solder Mask BGA PCB Paint Prevent Corrosive Arcing Soldering Paste Flux PCB UV Photosensitive Ink (Color Black)Features:Insulates printed circuit board against shorting and arcing.This paint is used to protect PCB traces from corrosion, moisture.It is also used for repairing PCB after soldering, rework.Apply paint on your PCB.Spread it on the PCB with covering the transparent mask film.Expose it under UV light ( or sun ) for a few minutes.Wash away the extra paint by gasoline or oil base solvent.Package Included:1 x KAISI Green/Black UV Curing Solder Mask InkDetail Pictures:More InformationPlease see Payment & Shipping for information regarding shipping and delivery lead times and other important information.Please confirm stock availability before purchasing.More ProductsView More Products

ProductKAISI Green Black UV Curing Solder Mask BGA PCB Paint Prevent Corrosive Arcing Soldering Paste Flux PCB UV Photosensitive Ink (Color Black)Features:Insulates printed circuit board against shorting and arcing.This paint is used to protect PCB traces from corrosion, moisture.It is also used for repairing PCB after soldering, rework.Apply paint on your PCB.Spread it on the PCB with covering the transparent mask film.Expose it under UV light ( or sun ) for a few minutes.Wash away the extra paint by gasoline or oil base solvent.Package Included:1 x KAISI Green/Black UV Curing Solder Mask InkDetail Pictures:More InformationPlease see Payment & Shipping for information regarding shipping and delivery lead times and other important information.Please confirm stock availability before purchasing.More ProductsView More Products

Liquid bottle PC3 1L for cleanser after ultrasonic water cleaner

The soldering flux RF 800 (ART 056) for SMD. A special dropper helps to proportion accurately. It does not need to clean.

The soldering flux RF 800 for SMD. A special dropper helps to proportion accurately. It does not need to clean.

Flux oil BEST-228AMT welding oil is high-quality pre-alloy powder and resin-based solder flux paste evenly mixed into the welding oil. It a special The gel additive mixtures, it
can prevent the residual object is light yellow and easy to remove tin ball, smoke- free environment, this oil meet the ANSI-welding stb-004-006 standards.

This is no CLEAN needed!!
Brand: AMTECH(Made in USA)
Capacity: 100Gram
Condition: New
Payment: Paypal
ROHS , MSDS Certified!!!!
This paste is specially formula for BGA reballing / balls works, it stick the balls much more well then regular flux, and provide easy bonding with component pad to balls with typical oven profile.
features:
Flux Type:NC-559-ASM
Lot#:082-183
volume:100G
MADE IN USA

Data type name Description
Main composition of flux Rosin(CAS：65997-06-0),Succinic acid(CAS:：110-15-6),Triethylene glycol monobutyl ether(CAS：143-22-6),Antioxidant,Rust inhibitor.
Liveness Neutral
Viscosity 80 mPa.s
Colour Off-white translucent
Graininess 5—10μm
Poisonous Very low
PH value 8
Flash point 120℃
The main purpose Chip, solder ball, tin-lead or tin-silver-copper alloy surface soldering aid and rework process
Remark Very versatile halogen-free flux and has long been known.

Original AMTECH RMA-223-UV 100g SMT / SMD BGA Soldering Solder Flux Paste For PCB Rework Reballing Welding Repair Tools Name: BGA Flux paste Condition: Brand New From Factory Quantity: 1 Bottle Brand: AMTECH Flux Type: RMA-223-UV Lot#: F-228-10-10 Volume: 100g The flux paste are specially formula for BGA reballing / balls works, they not only stick the balls much more well then regular flux, but also provide easy bonding with component pad to balls with typical oven profile.

Description:
100% brand new
Brand: JAPAN KINGBO
Quantity:1pcs
Type: No Clean RMA-218
Weight: 100 grams of 1 bottle
The KINGBO RMA-218 is a high viscosity no-clean flux ,it can be used for PCB,BGA,PGA reworking,it can be used for soldering and reballing of computer and phone chips.
No clean,no smoke,no irritative gas.
It is original , Made in Japan
Package:1pc

The CS-FLUX is a no-clean solder auxiliary highly liquid, lead-free specially designed for repairing BGA components (reballing and reflow) and other SMD components in laptop, gaming consoles etc. Key features in CS-FLUX:     The CS-FLUX when heated to approximately 150 degrees is converted into liquid and completely covers the micro gap between component BGA and PCB. In this manner all the "balls" of the component are covered with CS-FLUX and during reflow or removal of the fitting all the pad of the component and the PCB are not destroyed.
    The CS-FLUX is no clean flux but if necessary can be easily cleaned with alcohol. Causes no corrosion to the PCB and components.
    Thanks to the highly fluid nature of the minimum quantity of CS-FLUX is required for each repair resulting in much cleaner interface. Even to CS-FLUX contains lead.
    The CS-FLUX is very sticky and designed to hold the balls of the component into the stencil during reballing process.

The CS-FLUX is a no-clean solder auxiliary highly liquid, lead-free specially designed for repairing BGA components (reballing and reflow) and other SMD components in laptop, gaming consoles etc. Key features in CS-FLUX:     The CS-FLUX when heated to approximately 150 degrees is converted into liquid and completely covers the micro gap between component BGA and PCB. In this manner all the "balls" of the component are covered with CS-FLUX and during reflow or removal of the fitting all the pad of the component and the PCB are not destroyed.
    The CS-FLUX is no clean flux but if necessary can be easily cleaned with alcohol. Causes no corrosion to the PCB and components.
    Thanks to the highly fluid nature of the minimum quantity of CS-FLUX is required for each repair resulting in much cleaner interface. Even to CS-FLUX contains lead.
    The CS-FLUX is very sticky and designed to hold the balls of the component into the stencil during reballing process.

The product is paste-like, the colour silver-grey.
Recommended soldering temperature: 217°C Content: 50g, is enough for approx. 30.000 soldering points
Storage stability: approx. 5-6 months, recommended for storage in the refrigerator. (0-10°C).
For lab samples, small series, model-making, for a comfortable and professional processing of SMD-comonents with the help of hot air irons, hot plate, solder iron. Stored in a practical plastic case/syringe, garantees therefore a clean and pricise processing. The Solder Paste can be used directly from the cartridge, no mixing is required. Especially helpful by very dense placement. Easy processing with regulated hot air soldering iron or electronic soldering iron - apply the dosed paste on the solder point, place the component, heat the solder point, and the SMD-solder surface is ready as well as the SMD-circuit. The solder paste can also be used for SMD-Rework applications as new contact layer, so that you can achieve high-quality soldering surfaces. The soldering paste (or: paste solder) is a supply material like wire solder, colophony and belongs to every solder surface.

Complete set Flux Paste Amtech RMA-229 (10ml)

Special YX-636 lead free bga flux welding soldeing flux

Specifications
Apply to BGA lead free soldering Flux,No cleaning,High Pertormance,High reliability

Features of Flux:
1.Advanced SMT solider products
2.Environment friendly flux of no cleaning, no chlorine and no foul smell
3.Fugacity resistant flux
4.High performance, high reliability flux
5.To be used specially for hand-wrought hotair rewelding the hand set IC of model BGA

Solder Paste Mechanis 223 100g Highly Active Flux For Main Board Circuit Board Maintenance Flux PCB No-Clean Solder Oil RMA-223-UV RMA 223 BGA PCB Flux Paste No-Clean Solder / SMD Soldering Paste Flux Grease Features:
100% Brand New and High quality
High-end Quality & A Unique Formula & Perfect Performance.
The residue is colorless and transparent, does not affect t he detection, disposable and excellent cleaning performance.
Superior Fluxing Ability to Improve Soldering Performance
Flux flows smoothly for consistently secure and uniform solder connections with no mess.
Special formulation designs deliver excellent rheology and high viscosity retention ability even after long open time.

Exceptional print definition
Capacity: 100g
Long stencil life
Wide process window
Excellent wetting compatibility on most board finishes
Low voiding
Compatible with enclosed printing heads
Clear residue

Threaded Needle, 22 gauge x 1/2 in length, Fluid Dispensing, For Use With 5VZW4 and 5VZW5 Shot Meters, Package Quantity 5 Features
Application : Fluid Dispensing
For Use With : G0793274 and G0749646
Shot Meters Item : Threaded Needle
Characteristics : 22 gauge x 1/2 in length
ackage Quantity : 5

Εξαιρετικά αποδοτική flux πάστα συγκόλλησης Best με melting point 60°C. Χαρακτηριστικά
Color: λευκό
Melting point: 60°C
N.W.: 10g