Air spray pressed

Cleaning spray YX-539 for OCA 150ML

Spray for label remover Perfect 400ml

Kontakt PCC printed circuit board cleaner fluid.
After soldering printed circuit boards, flux residues do not only look unaesthetically, but can also cause corrosion damage and electrical breakdown by leakage currents. Small solder particles, bonded by flux, can create short circuits.
FEATURES
– Removes all types of flux, without leaving any residue.
– Dries quickly.
– Compatible with solder resist coatings and most printed circuit board base materials.
– Ensures perfectly clean printed circuit boards.
– Ensures better resistance against formation of surface leakage paths.
– Ensures high insulation resistance.
– Good adhesion for coatings.
APPLICATIONS
– Removing solder flux residues from electronic assemblies.
– Cleaning printed circuit boards after:
– repair work
– assembling small series
Note: The special applicator brush ensures a perfect cleaning which could otherwise only be obtained with very aggressive solvent mixtures.
Content: 200 ml

The product is designed to clean and degrease electrical components and contacts. It removes dirt, grease, old greases, oils, silicones and sulphides. It protects against corrosion and ensures low contact transition resistance. Capacity: 300 ml.
Spray TERMOPASTY Kontakt U AGT-012, 300ml.

Remove stickers quickly and easily with the RP0016 LABEL REMOVER SPRAY from Logilink. With just a small amount of spray you can remove stickers or scraps. - Soft on materials and leaves no residue.
- Strong solvent with a small amount.
- Quickly remove paper and plastic stickers, glues and paint stains.
Contents: 200 ml
Weight: 150 gr.
Dimensions (H x W x M): 20.1 x 6.5 x 6.5 cm.
OEM: RP0016

The professional solution for cleaning printed circuit boards is CLEANSER 15 PCCand in particular the remains of soldering

PCC 15 CHE1642 Cleanser 150ml Microchip

AERO DUSTER 100 & 105 contain liquefied gas which
provides a dry, powerful blast for easy removal of dust and
other loose contamination.
These products have been formulated without the use of any
CFC’s or HCFC’s.
APPLICATIONS
Suitable for instant cleaning of inaccessible areas or where
the use of solvents is not desirable. Can be used safely and
efficiently on:
Televisions , Video and Audio Equipment , Computers
Cameras , Business Equipment , Tape Heads
Clocks and Watches
These products should be held in a fairly upright position and sprayed directly
onto the part to be treated. The extension tube helps to reach remote areas
and components

Perfect for cleaning, removing dust from electrical equipment, keyboards, laptops, inside the computer case. A special applicator allows you to reach hard-to-reach places. It does not leave any traces.

Features:Cleans all hard-to-reach places easily and quicklyIncludes extension for precise cleaning100% ozone harmless400 ml canSpecificaties: Content: 100% LPG (butane/propane) Pressure: up to 5 KN Net content: 400 ml / 10 oz. (250 g), gross weight 349 g Can dimensions: 65 x 65 x 210 mm Net weight: 0.35 kgSystem iron:Safety precautions: Use only for the intended purpose Never point directly at other person or animal Disconnect electrical equipment from the power source before use Store and use in upright position only. Liquid gas can overflow and freeze, causing injuries or damage to equipment Pressurized container: do not shake, disassemble, puncture or heat over 50°C Extremely flammable: do not spray onto a naked flame or hot surface Use only in well ventilated areas, do not breath in aerosol fumes Keep away from childrenInhoud:Removes dust and residue from all hard-to-reach places.Includes practical extension hose for precise dust removal.Use and store in an upright position.

Suitable for removing dust and dirt from precision instruments, laboratory equipment, digital camera sensors (CCD and CMOS), optical fibers, optics, cameras, printers and computer keyboards. The compressed air jet can reach the most hidden areas, thanks to the supplied flexible tube. Eliminate moisture. Use only in an upright position. Use only on disconnected equipment and ventilate before reactivating the circuit. • DOES NOT DAMAGE THE OZONE BAND
• DOES NOT CONTAIN HFC, CFC NOR HCFC
• DOES NOT DAMAGE ANY MATERIAL
• QUICK AND EFFECTIVE, DOES NOT LEAVE CONDENSATION
• 100% ACTIVE PRODUCT

Original Falcon 530 (NEW PACKAGE) is an effective electronic contact cleaner used for iphone, samsung, sony water damage and refurbishment repair. Very good quality and popular for repair works.
Falcon 530 Electrical Contact Cleaner is made of high quality hydrocarbon solvent and surfactant, volatile fast, clean ability, suitable for most of the metal materials and non-metallic materials, green environmental protection products
The Falcon 530 cleaning spray is perfect for cleaning and maintaining electronic components such as motherboards, integrated circuits, connectors, and more. With its special formula, it effectively removes dirt, dust, and grease without leaving any residue, ensuring better performance and increased durability of devices. Additionally, its 550 ml size allows for prolonged cleaning.
Features: Evaporates quickly
Effectively removes stains
A wide range of applications
Environmentally safe
The rapid removal of oil, grease, dirt, remove stubborn stains and electrostatic etc.
Completely volatile, without leaving traces, the plastic, the metal surface no corrosion phenomenon
The safety performance, the deformation of the spray tank and the bursting pressure are higher than the national standard
Environmental protection products, in line with the EU RoHS environmental directives, through the quality management system and environmental management system certification Instructions: Before use, please do the bottom of the back of the tank body, so that the spray mist uniform
When spraying, press the nozzle, nozzle distance to the object about 30cm vertical injection, oil film thickness uniformity of mobile, completely covering the surface of the object Storage: All canned products is flammable, storage temperature should be below 50
When long-term storage, the carton should not exceed 8 boxes stacked high
Handling product should be gently, prohibited the use of throw, hit, and dangerous actions
Storage spaces should be ventilated, dry, cool, non-direct sunlight or exposed to outdoor
It is forbidden to strike and keep away from fire
Not upside down Environmentally friendly products, comply with EU RoHS environmental instructions.

Disinfectant spray surface from Platinet, ideal for equipment and surfaces that can be cleaned with a damp cloth - quickly and easily. Pomols, trash cans, cell phones, air conditioners, humidifiers, mice and keyboards. It is widely effective against bacteria, viruses and fungi (effective against viruses such as corona or influenza, due to its high alcohol content of 70%).
It comes in a practical spray spray of 150ml, so you always have it with you. Not intended for direct application to humans or animals. Caution: Extremely flammable aerosol. Pressure container: It may burst if heated. It causes severe eye irritation. It can cause drowsiness and dizziness. If medical advice is required, bring the container or product label with you. Keep out of reach of children. Away from heat, hot surfaces, sparks, open flames and other sources of ignition. Avoid smoking. Do not spray on an open flame or other source of ignition. Do not puncture or burn the container, even after use. Protect it from sunlight. Do not expose to temperatures above 50. C

Cleanser spray for repair PCB and many phones.
Cleanser IPA
All-purpose cleaning product in: electronics, precision mechanics and optics. It improves parameters and reliability of electric and electronic equipment working. High quality isopropanol. It is also used for cleaning optical equipment, magnetic heads, audio/video drive equipment, rubber roller in driving gear, and printed circuit. It removes waterproof ink, and crystallized lubrication agents.

Spay for clean contacts Degreaser Cleaner PERFECT 400ml in pcb and other parts

It is a product without a nozzle, brush and tube. It complements Article 108 and Article 109 in spray, i.e. CLEANSER IPA PLUS 150ml and 400ml, which are originally equipped with a short nozzle, brush and dispensing tube. Remove the nozzle from Article 108 or Article 109, transfer it to Article 092 and the product is ready for use. NOTE: nozzles from other manufacturers may not match! This product contains the highest purity isopropyl alcohol, which is the most versatile and most commonly used cleaner. Chemically neutral to most materials, does not leave marks, evaporates quickly. It is a great, economical solution for people who already have art.108 or art.109, because after their use you can use the nozzle and brush translating to art.092.